No photo of Jari Tuominen

Jari Tuominen

20002023

Research activity per year

If you made any changes in Pure these will be visible here soon.

Personal profile

Dissertation supervision and instruction

Jonne Näkki. 2018. Properties of alloy 625 claddings made with laser and CMT methods. Tampere University of Technology.

Thesis supervision, examination and instruction

Sheraz Ali. 2024. Ultrasonic-induced residual stress relief in 3D printed AlSi10Mg alloy. Tampere University.

Leevi Uutela. 2023. Friction Stir Welding - Deformation and Residual Stresses in Aluminum Alloys. Tampere University.

William Meneses Fuentes. 2023. Wire-based Directed Energy Deposition of AA7075: Using solid wire of AA7075 functionalized with TiC nanoparticles. Tampere University.

Arsalan Siddiqi. 2023. High-speed laser cladding: Optimization of process parameters for medium-thick coatings. Tampere University.

Aaro Ilmoniemi. 2023. Comparison of suitable surfacing methods for improving the wear resistance of the sealing surfaces of shafts. Tampere University.

Sergio Perosanz Amarillo. 2023. Effect of heat treatments on AlSi10Mg made by SLM and WAAM. Tampere University.

Daniela Balog. 2022. Heat Treatment and Material Characterization of WAAM Manufactured Tool Steel. Tampere University.

Mikko Paavilainen. 2022. Effect of Heat Treatment on High-Cycle Fatigue Properties of Additively Manufactured IN718. Tampere University.

Perttu Kauppi. 2021. Replacement of case-hardening to low-pressure carburizing. Tampere University.

Ulla Korhonen. 2021. Metal additive manufacturing in nuclear industry. Tampere University.

Andrea Gómez Fernández. 2020. Automated remanufacturing and upgrading of large industrial equipment. Tampere University.

Lucia Cobian Gonzalez. 2020. Directed energy deposition of AA7075 - The effect of TiC nanoparticles on microstructure. Tampere University. 

Shahroz Ahmed. 2019. Hardfaced wear resistant coatings for mining tools. Tampere University.

Jaakko Tapiola. 2017. Cold Metal Transfer cladding of wear and corrosion resistant coatings in engine applications. Tampere University of Technology.

Thesis supervision, examination and instruction at other universities

Davide Fantozzi. 2013. Fatigue Behavior of Nickel and Cobalt Laser Cladded Coatings on Steel Bars. University of Modena and Reggio Emilia, Italy. (Secondary supervisor to master's thesis).

Other supervision and instruction

Clara Balusson. 2022. Characterization of metallic coating obtained by the EHLA method. (Supervisor of internship). 

Corentin Penaud. 2019. Cavitation-erosion of welded deposits. (Supervisor of internship).

Anthony Camacho. 2017. Characterization of Cold Metal Transfer (CMT) clad Alloy 718 deposit. (Supervisor of internship).

Jindřich Kozák. 2014. Properties of metal-ceramic surfacing with embedded grains of tungsten carbides. (Supervisor of internship).

 

Role in preparation of funding applications for a research group

Main author for funding applications:

  • FATLASE - Fatigue durability of laser clad components, Interreg IV A North, 2011-2014
  • HiDEPO – High deposition rate laser cladding in hydraulic applications, M-Era-Net, 2014-2016
  • CMT – Nordic business opportunities from coating and additive manufacturing, Interreg North 2020, 2015-2018
  • CINEMA – Towards circular economy via eco-design and sustainable remanufacturing, Interreg North 2020, 2018-2021
  • NOPSA - Nopeasta pinnoitusmenetelmästä etua teollisuuteen, EAKR, 2022-2023

Expertise related to UN Sustainable Development Goals

In 2015, UN member states agreed to 17 global Sustainable Development Goals (SDGs) to end poverty, protect the planet and ensure prosperity for all. This person’s work contributes towards the following SDG(s):

  • SDG 7 - Affordable and Clean Energy
  • SDG 8 - Decent Work and Economic Growth
  • SDG 12 - Responsible Consumption and Production
  • SDG 13 - Climate Action
  • SDG 14 - Life Below Water

Education/Academic qualification

Doctor of Science (Technology), Materials Technology, Rock Engineering

Award Date: 9 Dec 2009

Master of Science (Technology)

Award Date: 10 Feb 1999

Fingerprint

Dive into the research topics where Jari Tuominen is active. These topic labels come from the works of this person. Together they form a unique fingerprint.
  • 1 Similar Profiles

Collaborations and top research areas from the last five years

Recent external collaboration on country/territory level. Dive into details by clicking on the dots or