Jarmo Poutala

Research output

Research output per year 1988 1997 2013 2014 2016 2017 2017

• 9 Article
• 5 Commissioned report
• 3 Conference contribution
• 2 Abstract

Research output per year

Research output per year

Search results

• 2017

  Finite element method incorporating coupled magneto-elastic model for magneto-mechanical energy harvester

  Ahmed, U., Harju, J., Poutala, J., Ruuskanen, P., Rasilo, P. & Kouhia, R., 19 Jun 2017. 2 p.

  Research output: Other conference contribution › Abstract › Scientific

  Open Access

  File

  • Harvesters 100%
  • Energy harvesting 87%
  • Numerical methods 75%
  • Magnetic Flux 70%
  • Magnetostriction 67%
  73 Downloads (Pure)

• Preliminary results on the effect of plastic deformation on magnetic properties

  Singh, D., Mökkönen, K., Poutala, J., Rasilo, P., Belahcen, A. & Kouhia, R., 22 Aug 2017, In: Rakenteiden mekaniikka. 50, 3, p. 372-375

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File

  • plastic deformation 100%
  • steels 83%
  • magnetic properties 79%
  31 Downloads (Pure)
• 2016

  Modeling and experimental verification of magneto‐mechanical energy harvesting device based on construction steel

  Ahmed, U., Ruuskanen, P., Kouhia, R., Rasilo, P. & Poutala, J., 31 Oct 2016. 4 p.

  Research output: Other conference contribution › Abstract › Scientific

  Open Access

  File

  • steel 100%
  • vibration 86%
  • energy 67%
  • modeling 57%
  • energy conversion 27%
  32 Downloads (Pure)

• On optimisation of structures under stability constraints - a simple example

  Kouhia, R., Pajunen, S. & Poutala, J., 9 Dec 2016, In: Rakenteiden mekaniikka. 49, 2, p. 69-77 9 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  Open Access

  File

  • Defects 100%
  • Costs 55%
  77 Downloads (Pure)
• 2014

  Fatigue behavior of laser clad round steel bars

  Tuominen, J., Näkki, J., Poutala, J., Miettinen, J., Peltola, T., Vuoristo, P., Rasehorn, I., Alam, M. M. & Kaplan, A. F. H., 2014, In: Journal of Laser Applications. p. 1-10 10 p., 012006.

  Research output: Contribution to journal › Article › Scientific › peer-review

  • Laser Cladding 100%
  • fatigue life 64%
  • Stellite (trademark) 51%
  • Laser cladding 50%
  • Lasers 48%
  6 Citations (Scopus)

• Mapping of stress raising in laser clad components depending on geometry and defects

  Kaplan, F. H., Alam, M. M., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, T., Peltola, T. & Barsoum, Z., 2014, 67the IIW Annual Assembly & International Conference, 13th-18th July, 2014 Sheraton Grande Walkerhill & W Seoul Walkerhill, Seoul, Korea. Doc.IV-1174-14. p. 1-14

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific

  Open Access

  File
  55 Downloads (Pure)
• 2013

  Analysis of the stress raising action of flaws in laser clad deposits

  Alam, M. M., Kaplan, A. F. H., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, J., Peltola, T. & Barsoum, Z., 2013, In: Materials and Design. 46, April, p. 328-337 10 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  24 Citations (Scopus)

• Fatigue properties of laser clad round steel bars

  Tuominen, J., Näkki, J., Poutala, J., Miettinen, J., Peltola, T., Vuoristo, P., Rasehorn, I., Alam, M. & Kaplan, A., 2013, Proceedings of 32nd International Congress on Applications of Lasers & Electro-Optics ICALEO, October 6-10, 2013, Miami, FL, USA. Laser Institute of America, p. 998-1007 10 p. P140. (International Congress on Applications of Lasers and Electro-Optics).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

• Stress raising in laser clad components depending on geometry and defects

  Kaplan, A. F. H., Alam, M. M., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkula, J., Peltola, T. & Barsoum, Z., 2013, The 14th Nordic Laser Materials Processing Conference, NOLAMP 14, August 26th - 28th 2013, Gothenburg, Sweden. Kaplan, A. & Engström, H. (eds.). Luleå: Luleå University of Technology, Department of Engineering Sciences and Mathematics, p. 281-292 12 p. (Nordic Laser Materials Processing Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific

  Open Access

  File
  59 Downloads (Pure)

• Surface pore initiated fatigue failure in laser clad components

  Alam, M. M., Powell, J., Kaplan, A. F. H., Tuominen, J., Vuoristo, P., Miettinen, J., Poutala, J., Näkki, J., Junkala, J. & Peltola, T., 2013, In: Journal of Laser Applications. 25, 3, p. 032004/1-6 6 p.

  Research output: Contribution to journal › Article › Scientific › peer-review
  5 Citations (Scopus)
• 1997

  Impact experiments of an external hip protector in young volunteers

  Parkkari, J., Kannus, P., Heikkilä, J., Poutala, J., Heinonen, A., Sievänen, H. & Vuori, I., 1997, In: Calcified Tissue International. 60, p. 354-357

  Research output: Contribution to journal › Article › Scientific › peer-review

  22 Citations (Scopus)

• Sandwich compression tests with defects

  Hynnä, A., Kuokkala, V-T. & Poutala, J., 1997, Tampere: Tampere University of Technology. 43 p. (Tampere University of Technology, Institute of Materials Science; no. 24B/97)

  Research output: Book/Report › Commissioned report

• Sandwich compression tests with defects

  Hynnä, A., Kuokkala, V-T. & Poutala, J., 1997, Tampere: Tampere University of Technology. 96 p. (Tampere University of Technology, Institute of Materials Science; no. 5B/97)

  Research output: Book/Report › Commissioned report
• 1996

  XMM/TT Testing of Sandwich Compression Tets Specimens, Ring-to-Sandwich Compression Test Specimens and Ring-to-Sandwich Tensile Test Specimens

  Hynnä, A., Kuokkala, V-T. & Poutala, J., 1996, Tampere: Tampereen teknillinen korkeakoulu. 140 p. (Tampereen teknillinen korkeakoulu, Materiaaliopin laitos, Raportti; no. 37B/96)

  Research output: Book/Report › Commissioned report
• 1995

  Energy-shunting external hip protector attenuates the peak femoral impact force below the theoretical fracture threshold: An in vitro biomechanical study under falling conditions of thel elderly

  Parkkari, J., Kannus, P., Heikkilä, J., Poutala, J., Sievänen, H. & Vuori, I., Oct 1995, In: Journal of Bone and Mineral Research. 10, 10, p. 1437-1442 6 p.

  Research output: Contribution to journal › Article › Scientific › peer-review

  • Hip 100%
  • Thigh 97%
  • Accidental Falls 96%
  • Femur 89%
  • Elderly 81%
  47 Citations (Scopus)
• 1994

  Force Attenuation Properties of Various Trochantric Padding Materials Under Typical Falling Conditions of the Elderly

  Parkkari, J., Kannus, P., Poutala, J. & Vuori, I., 1994, In: Journal of Bone and Mineral Research. 9, 9, p. 1391-1396

  Research output: Contribution to journal › Article › Scientific › peer-review

  44 Citations (Scopus)
• 1991

  A Novel Device Parameter Optimisation Tool for Circuit Simulation with Emphasis on Analog IC Design

  Ojala, P., Kankaala, K., Kaski, K., Poutala, J. & Tenhunen, H., 1991, In: Submitted to International Journal of Numerical Modelling.

  Research output: Contribution to journal › Article › Scientific › peer-review
• 1989

  Hierarchical integrated VLSI simulation environment - Device parameter optimization for circuit simulation

  Ojala, P., Kaski, K., Poutala, J., Kankaala, K. & Tenhunen, H., 1989, Tampere: Tampere University of Technology. 40 p. (TUT/Electronics Laboratory, Report; no. 5)

  Research output: Book/Report › Commissioned report
• 1988

  Integration of CAD Tools for Semiconducter Process And Design Development

  Kankaala, K., Ojala, P., Poutala, J., Kaski, K. & Tenhunen, H., 1988, Tampereen teknillinen korkeakoulu. 15 p. (Tampereen teknillinen korkeakoulu, Sähkötekniikan osasto, Elektroniikan laitos, Raportti; no. 4)

  Research output: Book/Report › Commissioned report