Research output per year
Research output per year
- 25 results
Search results
-
2024
More complex evaluation of surface integrity using residual stress depth profile testing
Malec, J., Cervinka, F., Sorsa, A., Santa-aho, S. & Sandera, P., 23 Sept 2024, ICBM15 Conference Proceedings: The 15th International Conference on Barkhausen noise and Micromagnetic testing. Santa-aho, S., Honkanen, M. & Vippola, M. (eds.). Tampere University, 7 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review
Open Access -
2018
Manufacturing of calibration samples for barkhausen noise method: case studies on temperature controlled laser and hydrogen-oxygen flame
Santa-aho, S., Deveci, M., Savolainen, S. & Vippola, M., 11 Jun 2018, Proceedings of the 12th ECNDT: June 11-15, Gothenburg, Sweden, 2018. 8 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review
Open AccessFile50 Downloads (Pure) -
Utilisation of generalised norms in the studies of Barkhausen noise measurement signals
Santa-aho, S., Vippola, M., Sorsa, A., Nikula, R.-P. & Leiviskä, K., 10 Sept 2018, The British Institute of Non-Destructive Testing proceedings of 57th Annual Conference on Non-Destructive Testing : 10-12 September 2018, Nottingham, UK. The British Institute of Non-Destructive TestingResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific
-
2017
Barkhausen noise Potcore sensor simulations with Comsol
Laitinen, A., Santa-aho, S., Lukinmaa, H., Suominen, L. & Vippola, M., 24 Sept 2017, 12th International Conference on Barkhausen Noise and Micromagnetic Testing. ICBM, p. 97-107 11 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific
-
Barkhausen noise response of fatigue tested super duplex stainless steel
Santa-aho, S., Lindgren, M., Björk, T. & Vippola, M., 24 Sept 2017, 12th International Conference on Barkhausen Noise and Micromagnetic Testing. ICBM, p. 159-169 11 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific
-
Case depth prediction of nitrided components
Sorsa, A., Santa-aho, S., Aylott, C., Shaw, B., Vippola, M. & Leiviskä, K., 24 Sept 2017, 12th International Conference on Barkhausen Noise and Micromagnetic Testing. ICBM, p. 65-72 8 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific
-
2015
Barkhausen Noise Measurements for Detecting Surface Changes during Grinding Process
Santa-aho, S., Sorsa, A., Hakanen, M., Leiviskä, K., Lepistö, T. K. & Vippola, M. S., 2015, Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies. 1st edition ed. Valardocs, p. 609-623 15 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review
-
Calibration Sample Preparation for Barkhausen Noise with Hydrogen-oxygen Flame
Deveci, M., Santa-aho, S., Savolainen, S. & Vippola, M., 2015, 11th International Conference on Barkhausen Noise and Micromagnetic Testing on June 18-21, 2015, in Aydin, Kusadasi, Turkey in conjunction with the 8th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, DIEMOLD .Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific
-
Comparison of Some Data-Driven Modelling Techniques Applied to Barkhausen Noise Data Sets
Sorsa, A., Santa-aho, S., Vippola, M. & Leiviskä, K., 2015, 11th International Conference on Barkhausen Noise and Micromagnetic Testing on June 18-21, 2015, in Aydin, Kusadasi, Turkey in conjunction with the 8th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, DIEMOLD. 11 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific
-
Manufacturing of Calibration Samples for Barkhausen Noise Measurements with Temperature Controlled Laser Processing
Santa-aho, S., Sorsa, A., Latokartano, J., Leiviskä, K., Suominen, L. & Vippola, M., 2015, 11th International Conference on Barkhausen Noise and Micromagnetic Testing on June 18-21, 2015, in Aydin, Kusadasi, Turkey in conjunction with the 8th International Conference and Exhibition on Design and Production of Machines and Dies/Molds, DIEMOLD .Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific
-
X-ray Diffraction based Residual Stress Profiling of Heat Affected Surface Layer in Flame Cut Heavy Steels
Saarinen, T., Jokiaho, T., Santa-aho, S., Vippola, M. & Peura, P., 2015, Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies. 1st edition ed. Valardocs, p. 595-607 13 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review
-
2014
An attempt to find an empirical model between Barkhausen noise and stress
Sorsa, A., Ruusunen, M., Leiviskä, K., Santa-aho, S., Vippola, M. & Lepistö, T., 2014, International Conference on Residual Stresses 9 (ICRS9), October 7-9, Garmish-Parténkirchen, Germany. Kurz, S. J. B., Mittemeijer, E. J. & Scholtes, B. (eds.). Switzerland: Trans Tech Publications, p. 209-216 8 p. (Materials science forum; vol. 768-769).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review
5 Citations (Scopus) -
Case-Depth Verification of Hardened Samples with Barkhausen Noise Sweeps
Santa-aho, S., Vippola, M., Lepistö, T., Sorsa, A., Leiviskä, K. & Hakanen, M., 2014, 10th International Conference on Barkhausen Noise and Micromagnetic Testing July 21-23, 2013, Baltimore, Maryland, USA Incorporated in the 40th, Annual Review of Progress in Quantitative Nondestructive Evaluation, July 21-26, 2013. American Institute of Physics, p. 1307-1314 8 p. (AIP Conference Proceedings; vol. 1581).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific
7 Citations (Scopus) -
Utilization of Frequency-Domain Information of Barkhausen Noise Signal in Quantitative Prediction of Material Properties
Santa-aho, S., Vippola, M., Lepistö, T., Sorsa, A. & Leiviskä, K., 2014, 10th International Conference on Barkhausen Noise and Micromagnetic Testing July 21-23, 2013, Baltimore, Maryland, USA, Incorporated in the 40th, Annual Review of Progress in Quantitative Nondestructive Evaluation, July 21-26, 2013. American Institute of Physics, p. 1256-1263 8 p. (AIP Conference Proceedings; vol. 1581).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific
7 Citations (Scopus) -
2013
A case study of using radial basis function neural networks for predicting material properties from Barkhausen noise signal
Sorsa, A., Santa-aho, S., Vippola, M., Lepistö, T. & Leiviskä, K., 2013, Proceedings of 18th Nordic Process Control Workshop, 22-23 August 2013, Oulu, Finland. Kovács, J. & Hultgren, M. (eds.). Oulu: University of Oulu, p. 1-6 6 p. (Nordic Process Control Workshop).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific
-
Barkhausen kohina -mittauksen hyödyntäminen materiaaliominaisuuksien ennustamisessa
Translated title of the contribution :Barkhausen kohina -mittauksen hyödyntäminen materiaaliominaisuuksien ennustamisessa Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review
-
2011
Study of Case-hardened and Nitrided Samples Using Barkhausen Noise Analysis and X-ray Diffraction
Vrkoslavova, L., Ganev, N., Santa-aho, S., Vippola, M. & Lepistö, T., 2011, ICBM-9, 9th International Conference on Barkhausen Noise and Micromagnetic Testing, June 28-30, 2011, Technical University of Liberec, Czech Republic, Conference Proceedings. Liberec: Technical University of Liberec, p. 1-10 10 p. (International Conference on Barkhausen Noise and Micromagnetic Testing ICBM).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific
-
Use of Low Frequency Barkhausen Noise for Inspection of Induction Hardened Rod Samples
Santa-aho, S., Vippola, M., Lindgren, M., Sorsa, A., Leiviskä, K. & Lepistö, T., 2011, ICBM-9, 9th International Conference on Barkhausen Noise and Micromagnetic Testing, June 28-30, 2011, Technical University of Liberec, Czech Republic, Conference Proceedings. Liberec: Technical University of Liberec, p. 1-13 13 p. (International Conference on Barkhausen Noise and Micromagnetic Testing ICBM).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific
-
2010
Laser produced grinding burns for Barkhausen noise measurement result validation
Santa-Aho, S., Sorsa, A., Vippola, M., Latokartano, J., Lindgren, M. & Lepistö, T., 2010, The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM2010 / MFPT 2010, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England. p. 1-12 12 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific
1 Citation (Scopus) -
The use of Barkhausen noise to detect the case-depth of induction hardened samples
Santa-Aho, S., Hakalahti, J., Vippola, M., Lepistö, T., Lindgren, M. & Hakanen, M., 2010, 8th International Conference on Barkhausen Noise and Micromagnetic Testing (ICBM8), February 11-12, 2010, Anupuram, India. p. 1-12 12 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific
-
2009
Case study of grinding burn detection of case-hardened gear wheel with barkahausen noise measurements
Santa-aho, S., Vippola, M., Lepistö, T. & Lindgren, M., 2009, The sixth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM2009 / MFPT 2009, 23-25 June 2009, Dublin, Ireland. p. 12 pResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific
-
Characterization of laser and induction simulated grinding burns with Barkhausen noise measurements
Santa-aho, S., Vippola, M., Lepistö, T., Lindgren, M., Siiriäinen, J., Latokartano, J., Virkkunen, I. & Kemppainen, M., 2009, 7th International Conference on Barkhausen Noise and Micromagnetic Testing, July 15-16, 2009, Aachen, Germany. Suortti- Suominen, T. (ed.). p. 12 pResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific
-
Quality feature modelling of laser processed grinding burns based on Barkhausen noise measuments
Sorsa, A., Leiviskä, K., Santa-aho, S., Vippola, M. & Lepistö, T., 2009, NDT 2009, Conference and Materials Testing 2009 Exhibition, 15-17 September 2009, Blackpool, UK. p. 10 pResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific
-
2008
Characterization of case-hardened gear steel by multiparameter barkhausen noise measurements
Santa-Aho, S., Vippola, M. & Lepistö, T., 2008, NDT 2008 Conference, the 47th Annual Conference of the British Institute of Non-Desctructive Testing, 16-18 September 2008, Cheshire, UK. p. 10 pResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific
-
Prediction of residual stress from Barkhausen noise signal
Sorsa, A., Leiviskä, K. & Santa-Aho, S., 2008, NDT 2008 Conference, the 47th Annual Conference of the British Institute of Non-Desctructive Testing, 16-18 September 2008, Cheshire, UK. p. 10 pResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific