Accelerator-quality HTS dipole magnet demonstrator designs for the EuCARD-2 5-T 40-mm clear aperture magnet

G. A. Kirby; J. Van Nugteren; A. Ballarino; L. Bottura; N. Chouika; S. Clement; V. Datskov; L. Fajardo; J. Fleiter; R. Gauthier; L. Gentini; L. Lambert; M. Lopes; J. C. Perez; G. De Rijk; A. Rijllart; L. Rossi; H. Ten Kate; M. Durante; P. Fazilleau; C. Lorin; E. Härö; A. Stenvall; S. Caspi; M. Marchevsky; W. Goldacker; A. Kario

doi:10.1109/TASC.2014.2361933

Accelerator-quality HTS dipole magnet demonstrator designs for the EuCARD-2 5-T 40-mm clear aperture magnet

G. A. Kirby, J. Van Nugteren, A. Ballarino, L. Bottura, N. Chouika, S. Clement, V. Datskov, L. Fajardo, J. Fleiter, R. Gauthier, L. Gentini, L. Lambert, M. Lopes, J. C. Perez, G. De Rijk, A. Rijllart, L. Rossi, H. Ten Kate, M. Durante, P. FazilleauC. Lorin, E. Härö, A. Stenvall, S. Caspi, M. Marchevsky, W. Goldacker, A. Kario

Research output: Contribution to journal › Article › Scientific › peer-review

75 Citations (Scopus)

Abstract

Future high-energy accelerators will need very high magnetic fields in the range of 20 T. The Enhanced European Coordination for Accelerator Research and Development (EuCARD-2) Work Package 10 is a collaborative push to take high-temperature superconductor (HTS) materials into an accelerator-quality demonstrator magnet. The demonstrator will produce 5 T stand alone and between 17 and 20 T when inserted into the 100-mm aperture of a Fresca-2 high-field outsert magnet. The HTS magnet will demonstrate the field strength and the field quality that can be achieved. An effective quench detection and protection system will have to be developed to operate with the HTS superconducting materials. This paper presents a ReBCO magnet design using a multistrand Roebel cable that develops a stand-alone field of 5 T in a 40-mm clear aperture and discusses the challenges associated with a good field quality using this type of material. A selection of magnet designs is presented as the result of the first phase of development.

Original language	English
Article number	4000805
Journal	IEEE Transactions on Applied Superconductivity
Volume	25
Issue number	3
DOIs	https://doi.org/10.1109/TASC.2014.2361933
Publication status	Published - 1 Jun 2015
Publication type	A1 Journal article-refereed

Keywords

Accelerator magnet
EuCARD-2
HTS magnet design
quench protection
ReBCO
Superconducting Magnets
YBCO Roebel cable

Publication forum classification

Publication forum level 1

ASJC Scopus subject areas

Electrical and Electronic Engineering
Condensed Matter Physics
Electronic, Optical and Magnetic Materials

Access to Document

10.1109/TASC.2014.2361933

Cite this

Kirby, G. A., Van Nugteren, J., Ballarino, A., Bottura, L., Chouika, N., Clement, S., Datskov, V., Fajardo, L., Fleiter, J., Gauthier, R., Gentini, L., Lambert, L., Lopes, M., Perez, J. C., De Rijk, G., Rijllart, A., Rossi, L., Ten Kate, H., Durante, M., ... Kario, A. (2015). Accelerator-quality HTS dipole magnet demonstrator designs for the EuCARD-2 5-T 40-mm clear aperture magnet. IEEE Transactions on Applied Superconductivity, 25(3), Article 4000805. https://doi.org/10.1109/TASC.2014.2361933

@article{4fd27057663c475286b2767ddd0598b5,

title = "Accelerator-quality HTS dipole magnet demonstrator designs for the EuCARD-2 5-T 40-mm clear aperture magnet",

abstract = "Future high-energy accelerators will need very high magnetic fields in the range of 20 T. The Enhanced European Coordination for Accelerator Research and Development (EuCARD-2) Work Package 10 is a collaborative push to take high-temperature superconductor (HTS) materials into an accelerator-quality demonstrator magnet. The demonstrator will produce 5 T stand alone and between 17 and 20 T when inserted into the 100-mm aperture of a Fresca-2 high-field outsert magnet. The HTS magnet will demonstrate the field strength and the field quality that can be achieved. An effective quench detection and protection system will have to be developed to operate with the HTS superconducting materials. This paper presents a ReBCO magnet design using a multistrand Roebel cable that develops a stand-alone field of 5 T in a 40-mm clear aperture and discusses the challenges associated with a good field quality using this type of material. A selection of magnet designs is presented as the result of the first phase of development.",

keywords = "Accelerator magnet, EuCARD-2, HTS magnet design, quench protection, ReBCO, Superconducting Magnets, YBCO Roebel cable",

author = "Kirby, {G. A.} and {Van Nugteren}, J. and A. Ballarino and L. Bottura and N. Chouika and S. Clement and V. Datskov and L. Fajardo and J. Fleiter and R. Gauthier and L. Gentini and L. Lambert and M. Lopes and Perez, {J. C.} and {De Rijk}, G. and A. Rijllart and L. Rossi and {Ten Kate}, H. and M. Durante and P. Fazilleau and C. Lorin and E. H{\"a}r{\"o} and A. Stenvall and S. Caspi and M. Marchevsky and W. Goldacker and A. Kario",

year = "2015",

month = jun,

day = "1",

doi = "10.1109/TASC.2014.2361933",

language = "English",

volume = "25",

journal = "IEEE Transactions on Applied Superconductivity",

issn = "1051-8223",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "3",

}

Kirby, GA, Van Nugteren, J, Ballarino, A, Bottura, L, Chouika, N, Clement, S, Datskov, V, Fajardo, L, Fleiter, J, Gauthier, R, Gentini, L, Lambert, L, Lopes, M, Perez, JC, De Rijk, G, Rijllart, A, Rossi, L, Ten Kate, H, Durante, M, Fazilleau, P, Lorin, C, Härö, E, Stenvall, A, Caspi, S, Marchevsky, M, Goldacker, W & Kario, A 2015, 'Accelerator-quality HTS dipole magnet demonstrator designs for the EuCARD-2 5-T 40-mm clear aperture magnet', IEEE Transactions on Applied Superconductivity, vol. 25, no. 3, 4000805. https://doi.org/10.1109/TASC.2014.2361933

TY - JOUR

T1 - Accelerator-quality HTS dipole magnet demonstrator designs for the EuCARD-2 5-T 40-mm clear aperture magnet

AU - Kirby, G. A.

AU - Van Nugteren, J.

AU - Ballarino, A.

AU - Bottura, L.

AU - Chouika, N.

AU - Clement, S.

AU - Datskov, V.

AU - Fajardo, L.

AU - Fleiter, J.

AU - Gauthier, R.

AU - Gentini, L.

AU - Lambert, L.

AU - Lopes, M.

AU - Perez, J. C.

AU - De Rijk, G.

AU - Rijllart, A.

AU - Rossi, L.

AU - Ten Kate, H.

AU - Durante, M.

AU - Fazilleau, P.

AU - Lorin, C.

AU - Härö, E.

AU - Stenvall, A.

AU - Caspi, S.

AU - Marchevsky, M.

AU - Goldacker, W.

AU - Kario, A.

PY - 2015/6/1

Y1 - 2015/6/1

N2 - Future high-energy accelerators will need very high magnetic fields in the range of 20 T. The Enhanced European Coordination for Accelerator Research and Development (EuCARD-2) Work Package 10 is a collaborative push to take high-temperature superconductor (HTS) materials into an accelerator-quality demonstrator magnet. The demonstrator will produce 5 T stand alone and between 17 and 20 T when inserted into the 100-mm aperture of a Fresca-2 high-field outsert magnet. The HTS magnet will demonstrate the field strength and the field quality that can be achieved. An effective quench detection and protection system will have to be developed to operate with the HTS superconducting materials. This paper presents a ReBCO magnet design using a multistrand Roebel cable that develops a stand-alone field of 5 T in a 40-mm clear aperture and discusses the challenges associated with a good field quality using this type of material. A selection of magnet designs is presented as the result of the first phase of development.

AB - Future high-energy accelerators will need very high magnetic fields in the range of 20 T. The Enhanced European Coordination for Accelerator Research and Development (EuCARD-2) Work Package 10 is a collaborative push to take high-temperature superconductor (HTS) materials into an accelerator-quality demonstrator magnet. The demonstrator will produce 5 T stand alone and between 17 and 20 T when inserted into the 100-mm aperture of a Fresca-2 high-field outsert magnet. The HTS magnet will demonstrate the field strength and the field quality that can be achieved. An effective quench detection and protection system will have to be developed to operate with the HTS superconducting materials. This paper presents a ReBCO magnet design using a multistrand Roebel cable that develops a stand-alone field of 5 T in a 40-mm clear aperture and discusses the challenges associated with a good field quality using this type of material. A selection of magnet designs is presented as the result of the first phase of development.

KW - Accelerator magnet

KW - EuCARD-2

KW - HTS magnet design

KW - quench protection

KW - ReBCO

KW - Superconducting Magnets

KW - YBCO Roebel cable

U2 - 10.1109/TASC.2014.2361933

DO - 10.1109/TASC.2014.2361933

M3 - Article

AN - SCOPUS:84920829736

SN - 1051-8223

VL - 25

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

IS - 3

M1 - 4000805

ER -

Accelerator-quality HTS dipole magnet demonstrator designs for the EuCARD-2 5-T 40-mm clear aperture magnet

Abstract

Keywords

Publication forum classification

ASJC Scopus subject areas

Access to Document

Fingerprint

Cite this