An insight into the rough surface effect on fretting characteristics of quenched and tempered steel

Amirhossein Zabihi; Janne Juoksukangas; Jouko Hintikka; Mari Honkanen; Antti Mäntylä; Joona Vaara; Tero Frondelius; Minnamari Vippola; Arto Lehtovaara

An insight into the rough surface effect on fretting characteristics of quenched and tempered steel

Amirhossein Zabihi, Janne Juoksukangas, Jouko Hintikka, Mari Honkanen, Antti Mäntylä, Joona Vaara, Tero Frondelius, Minnamari Vippola, Arto Lehtovaara

Research output: Other conference contribution › Abstract › Scientific

Abstract

The effect of the rough surface texture and its orientation on the fretting behavior of 34CrNiMo6 steel was investigated via an annular flat-on-flat contact configuration. A lower friction peak in the running-in phase and approximately the same coefficient of friction value in the steady-state one were observed for the rough surfaces than for the smooth ones under gross sliding conditions. However, in the stable friction tests, roughly the same threshold levels were attained for both rough and smooth contacts.

Keywords: Fretting, Rough Surfaces, Friction, Material Characterization

Original language	English
Publication status	Published - 2022
Publication type	Not Eligible
Event	7th World Tribology Congress, WTC 2022 - Lyon, France Duration: 10 Jul 2022 → 15 Jul 2022 https://www.wtc-2022.org/#:~:text=The%207th%20World%20Tribology,2022%20a%20landmark%20Tribology%20Congress.&text=A%20new%20page%20is%20now,7th%20World%20Tribology%20Congress.

Conference

Conference	7th World Tribology Congress, WTC 2022
Country/Territory	France
City	Lyon
Period	10/07/22 → 15/07/22
Internet address	https://www.wtc-2022.org/#:~:text=The%207th%20World%20Tribology,2022%20a%20landmark%20Tribology%20Congress.&text=A%20new%20page%20is%20now,7th%20World%20Tribology%20Congress.

Tampere Microscopy Center
Vippola, M. (Manager), Honkanen, M. (Operator) & Salminen, T. (Operator)
Faculty of Engineering and Natural Sciences
Facility/equipment: Facility

Cite this

@conference{638b4c71d84c4f0cb8d93b44cc19dbd2,

title = "An insight into the rough surface effect on fretting characteristics of quenched and tempered steel",

abstract = "The effect of the rough surface texture and its orientation on the fretting behavior of 34CrNiMo6 steel was investigated via an annular flat-on-flat contact configuration. A lower friction peak in the running-in phase and approximately the same coefficient of friction value in the steady-state one were observed for the rough surfaces than for the smooth ones under gross sliding conditions. However, in the stable friction tests, roughly the same threshold levels were attained for both rough and smooth contacts.Keywords: Fretting, Rough Surfaces, Friction, Material Characterization ",

author = "Amirhossein Zabihi and Janne Juoksukangas and Jouko Hintikka and Mari Honkanen and Antti M{\"a}ntyl{\"a} and Joona Vaara and Tero Frondelius and Minnamari Vippola and Arto Lehtovaara",

year = "2022",

language = "English",

note = "7th World Tribology Congress, WTC 2022 ; Conference date: 10-07-2022 Through 15-07-2022",

url = "https://www.wtc-2022.org/#:~:text=The%207th%20World%20Tribology,2022%20a%20landmark%20Tribology%20Congress.&text=A%20new%20page%20is%20now,7th%20World%20Tribology%20Congress.",

}

TY - CONF

T1 - An insight into the rough surface effect on fretting characteristics of quenched and tempered steel

AU - Zabihi, Amirhossein

AU - Juoksukangas, Janne

AU - Hintikka, Jouko

AU - Honkanen, Mari

AU - Mäntylä, Antti

AU - Vaara, Joona

AU - Frondelius, Tero

AU - Vippola, Minnamari

AU - Lehtovaara, Arto

PY - 2022

Y1 - 2022

N2 - The effect of the rough surface texture and its orientation on the fretting behavior of 34CrNiMo6 steel was investigated via an annular flat-on-flat contact configuration. A lower friction peak in the running-in phase and approximately the same coefficient of friction value in the steady-state one were observed for the rough surfaces than for the smooth ones under gross sliding conditions. However, in the stable friction tests, roughly the same threshold levels were attained for both rough and smooth contacts.Keywords: Fretting, Rough Surfaces, Friction, Material Characterization

AB - The effect of the rough surface texture and its orientation on the fretting behavior of 34CrNiMo6 steel was investigated via an annular flat-on-flat contact configuration. A lower friction peak in the running-in phase and approximately the same coefficient of friction value in the steady-state one were observed for the rough surfaces than for the smooth ones under gross sliding conditions. However, in the stable friction tests, roughly the same threshold levels were attained for both rough and smooth contacts.Keywords: Fretting, Rough Surfaces, Friction, Material Characterization

M3 - Abstract

T2 - 7th World Tribology Congress, WTC 2022

Y2 - 10 July 2022 through 15 July 2022

ER -

An insight into the rough surface effect on fretting characteristics of quenched and tempered steel

Abstract

Conference

Fingerprint

Equipment

Tampere Microscopy Center

Cite this