Capability-based ontological resource model and rules for describing and assigning resources in sheet metal manufacturing

Eeva Järvenpää; Mika Lohtander; Reijo Tuokko

doi:10.1109/ISAM.2013.6643500

Capability-based ontological resource model and rules for describing and assigning resources in sheet metal manufacturing

Eeva Järvenpää, Mika Lohtander, Reijo Tuokko

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

1 Citation (Scopus)

24 Downloads (Pure)

Translated title of the contribution	Capability-based ontological resource model and rules for describing and assigning resources in sheet metal manufacturing
Original language	English
Title of host publication	2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China
Place of Publication	Piscataway
Publisher	IEEE
Pages	105-108
Number of pages	3
ISBN (Print)	978-1-4799-1656-6
DOIs	https://doi.org/10.1109/ISAM.2013.6643500
Publication status	Published - 2013
Publication type	A4 Article in conference proceedings
Event	International Symposium on Assembly and Manufacturing - Duration: 1 Jan 2013 → …

Publication series

Name	International Symposium on Assembly and Manufacturing

Conference

Conference	International Symposium on Assembly and Manufacturing
Period	1/01/13 → …

Publication forum classification

Publication forum level 1

Access to Document

10.1109/ISAM.2013.6643500

ISAM2013_FinalFullPaper_Jarvenpaa
© 2013 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
Accepted author manuscript, 846 KB

http://urn.fi/URN:NBN:fi:tty-201707271629Licence: Unspecified

Cite this

Järvenpää, E., Lohtander, M., & Tuokko, R. (2013). Capability-based ontological resource model and rules for describing and assigning resources in sheet metal manufacturing. In 2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China (pp. 105-108). (International Symposium on Assembly and Manufacturing). IEEE. https://doi.org/10.1109/ISAM.2013.6643500

Järvenpää, Eeva ; Lohtander, Mika ; Tuokko, Reijo. / Capability-based ontological resource model and rules for describing and assigning resources in sheet metal manufacturing. 2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway : IEEE, 2013. pp. 105-108 (International Symposium on Assembly and Manufacturing).

@inproceedings{a03eaab50b3d461d9a17e05201e98e67,

title = "Capability-based ontological resource model and rules for describing and assigning resources in sheet metal manufacturing",

author = "Eeva J{\"a}rvenp{\"a}{\"a} and Mika Lohtander and Reijo Tuokko",

note = "Contribution: organisation=tte,FACT1=1<br/>Portfolio EDEND: 2013-12-29<br/>Publisher name: Institute of Electrical and Electronics Engineers IEEE; International Symposium on Assembly and Manufacturing ; Conference date: 01-01-2013",

year = "2013",

doi = "10.1109/ISAM.2013.6643500",

language = "English",

isbn = "978-1-4799-1656-6",

series = "International Symposium on Assembly and Manufacturing",

publisher = "IEEE",

pages = "105--108",

booktitle = "2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi{\textquoteright}an, China",

address = "United States",

}

Järvenpää, E, Lohtander, M & Tuokko, R 2013, Capability-based ontological resource model and rules for describing and assigning resources in sheet metal manufacturing. in 2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. International Symposium on Assembly and Manufacturing, IEEE, Piscataway, pp. 105-108, International Symposium on Assembly and Manufacturing, 1/01/13. https://doi.org/10.1109/ISAM.2013.6643500

Capability-based ontological resource model and rules for describing and assigning resources in sheet metal manufacturing. / Järvenpää, Eeva; Lohtander, Mika; Tuokko, Reijo.
2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway: IEEE, 2013. p. 105-108 (International Symposium on Assembly and Manufacturing).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

TY - GEN

T1 - Capability-based ontological resource model and rules for describing and assigning resources in sheet metal manufacturing

AU - Järvenpää, Eeva

AU - Lohtander, Mika

AU - Tuokko, Reijo

N1 - Contribution: organisation=tte,FACT1=1<br/>Portfolio EDEND: 2013-12-29<br/>Publisher name: Institute of Electrical and Electronics Engineers IEEE

PY - 2013

Y1 - 2013

U2 - 10.1109/ISAM.2013.6643500

DO - 10.1109/ISAM.2013.6643500

M3 - Conference contribution

SN - 978-1-4799-1656-6

T3 - International Symposium on Assembly and Manufacturing

SP - 105

EP - 108

BT - 2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China

PB - IEEE

CY - Piscataway

T2 - International Symposium on Assembly and Manufacturing

Y2 - 1 January 2013

ER -

Järvenpää E, Lohtander M, Tuokko R. Capability-based ontological resource model and rules for describing and assigning resources in sheet metal manufacturing. In 2013 IEEE International Symposium of Assembly and Manufacturing (ISAM), July 30th – Aug 2nd 2013, Xi’an, China. Piscataway: IEEE. 2013. p. 105-108. (International Symposium on Assembly and Manufacturing). doi: 10.1109/ISAM.2013.6643500