Design and Implementation of Fully 3D Miniaturized Passive UHF RFID Tag for Sensing Applications

Masoumeh Hasani; Lauri Sydänheimo; Leena Ukkonen

Design and Implementation of Fully 3D Miniaturized Passive UHF RFID Tag for Sensing Applications

Masoumeh Hasani
, Lauri Sydänheimo
, Leena Ukkonen

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

1 Citation (Scopus)

Abstract

In this paper, we present a 3D passive UHF RFID tag that is fabricated utilizing direct write printing method. The dual antennas tag is printed using the dispensing technique on a wooden cube with dimension of 8 cm³ (2 cm × 2
cm × 2 cm), which is the smallest RFID tag fabricated in 3D structure so far. The narrow-line tag antenna has a near-isotropic radiation pattern which enabling the tag with full visibility. The antenna design and design parameters are quantified using numerical simulations. A prototype model of tag is manufactured to validate the simulation model. The simulation and measurements results show the read range about 2 m (100 times the tag dimension) in 360˚ around the tag.

Original language	English
Title of host publication	2015 Loughborough Antennas & Propagation Conference (LAPC)
Publisher	IEEE
ISBN (Print)	978-1-4799-8943-0
Publication status	Published - 2015
Publication type	A4 Article in conference proceedings
Event	Loughborough Antennas & Propagation Conference - Duration: 1 Jan 1900 → …

Conference

Conference	Loughborough Antennas & Propagation Conference
Period	1/01/00 → …

Publication forum classification

Publication forum level 1

Cite this

@inproceedings{1bde3d8487094089a06f7157e8e827d6,

title = "Design and Implementation of Fully 3D Miniaturized Passive UHF RFID Tag for Sensing Applications",

abstract = "In this paper, we present a 3D passive UHF RFID tag that is fabricated utilizing direct write printing method. The dual antennas tag is printed using the dispensing technique on a wooden cube with dimension of 8 cm³ (2 cm × 2 cm × 2 cm), which is the smallest RFID tag fabricated in 3D structure so far. The narrow-line tag antenna has a near-isotropic radiation pattern which enabling the tag with full visibility. The antenna design and design parameters are quantified using numerical simulations. A prototype model of tag is manufactured to validate the simulation model. The simulation and measurements results show the read range about 2 m (100 times the tag dimension) in 360˚ around the tag. ",

author = "Masoumeh Hasani and Lauri Syd{\"a}nheimo and Leena Ukkonen",

year = "2015",

language = "English",

isbn = "978-1-4799-8943-0",

booktitle = "2015 Loughborough Antennas \& Propagation Conference (LAPC)",

publisher = "IEEE",

address = "United States",

note = "Loughborough Antennas \& Propagation Conference ; Conference date: 01-01-1900",

}

TY - GEN

T1 - Design and Implementation of Fully 3D Miniaturized Passive UHF RFID Tag for Sensing Applications

AU - Hasani, Masoumeh

AU - Sydänheimo, Lauri

AU - Ukkonen, Leena

PY - 2015

Y1 - 2015

N2 - In this paper, we present a 3D passive UHF RFID tag that is fabricated utilizing direct write printing method. The dual antennas tag is printed using the dispensing technique on a wooden cube with dimension of 8 cm³ (2 cm × 2 cm × 2 cm), which is the smallest RFID tag fabricated in 3D structure so far. The narrow-line tag antenna has a near-isotropic radiation pattern which enabling the tag with full visibility. The antenna design and design parameters are quantified using numerical simulations. A prototype model of tag is manufactured to validate the simulation model. The simulation and measurements results show the read range about 2 m (100 times the tag dimension) in 360˚ around the tag.

AB - In this paper, we present a 3D passive UHF RFID tag that is fabricated utilizing direct write printing method. The dual antennas tag is printed using the dispensing technique on a wooden cube with dimension of 8 cm³ (2 cm × 2 cm × 2 cm), which is the smallest RFID tag fabricated in 3D structure so far. The narrow-line tag antenna has a near-isotropic radiation pattern which enabling the tag with full visibility. The antenna design and design parameters are quantified using numerical simulations. A prototype model of tag is manufactured to validate the simulation model. The simulation and measurements results show the read range about 2 m (100 times the tag dimension) in 360˚ around the tag.

M3 - Conference contribution

SN - 978-1-4799-8943-0

BT - 2015 Loughborough Antennas & Propagation Conference (LAPC)

PB - IEEE

T2 - Loughborough Antennas & Propagation Conference

Y2 - 1 January 1900

ER -

Design and Implementation of Fully 3D Miniaturized Passive UHF RFID Tag for Sensing Applications

Abstract

Conference

Publication forum classification

Fingerprint

Cite this