Formal Resource and Capability Descriptions Supporting Rapid Reconfiguration of Assembly Systems

Eeva Järvenpää; Niko Siltala; Minna Lanz

Formal Resource and Capability Descriptions Supporting Rapid Reconfiguration of Assembly Systems

Eeva Järvenpää
, Niko Siltala
, Minna Lanz

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

72 Citations (Scopus)

246 Downloads (Pure)

Abstract

Today’s production environment is characterised by frequent changes in terms of high product variation, small batch sizes, high demand fluctuation as well as random unexpected disturbances on the factory floor. Production systems need to be rapidly reconfigurable and adaptable to these changing requirements. ReCaM project targets to develop a set of integrated tools for rapid and autonomous reconfiguration of production systems. Such tools need to be supported by formal information models describing the product requirements, as well as resource characteristics and functionalities. This paper concentrates on introducing the formal resource and capability models, which are used and further enriched to support ReCaM targets. Also examples of how these models can be applied to support rapid reconfiguration will be given.

Original language	English
Title of host publication	Proceedings of the 12th Conference on Automation Science and Engineering, and International Symposium on Assembly and Manufacturing
Publisher	IEEE
Pages	120-125
Number of pages	6
ISBN (Electronic)	978-1-5090-2411-7
Publication status	Published - Aug 2016
Publication type	A4 Article in conference proceedings
Event	INTERNATIONAL SYMPOSIUM ON ASSEMBLY AND MANUFACTURING - Duration: 1 Jan 1900 → …

Conference

Conference	INTERNATIONAL SYMPOSIUM ON ASSEMBLY AND MANUFACTURING
Period	1/01/00 → …

Publication forum classification

Publication forum level 1

Access to Document

ISAM2016_FinalPaper_Jarvenpaa
© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
Accepted author manuscript, 576 KB

http://urn.fi/URN:NBN:fi:tty-201609234545

Cite this

@inproceedings{1287beaae65e45839c7b234f8415d7a0,

title = "Formal Resource and Capability Descriptions Supporting Rapid Reconfiguration of Assembly Systems",

abstract = "Today{\textquoteright}s production environment is characterised by frequent changes in terms of high product variation, small batch sizes, high demand fluctuation as well as random unexpected disturbances on the factory floor. Production systems need to be rapidly reconfigurable and adaptable to these changing requirements. ReCaM project targets to develop a set of integrated tools for rapid and autonomous reconfiguration of production systems. Such tools need to be supported by formal information models describing the product requirements, as well as resource characteristics and functionalities. This paper concentrates on introducing the formal resource and capability models, which are used and further enriched to support ReCaM targets. Also examples of how these models can be applied to support rapid reconfiguration will be given. ",

author = "Eeva J{\"a}rvenp{\"a}{\"a} and Niko Siltala and Minna Lanz",

year = "2016",

month = aug,

language = "English",

pages = "120--125",

booktitle = "Proceedings of the 12th Conference on Automation Science and Engineering, and International Symposium on Assembly and Manufacturing",

publisher = "IEEE",

address = "United States",

note = "INTERNATIONAL SYMPOSIUM ON ASSEMBLY AND MANUFACTURING ; Conference date: 01-01-1900",

}

Järvenpää, E, Siltala, N & Lanz, M 2016, Formal Resource and Capability Descriptions Supporting Rapid Reconfiguration of Assembly Systems. in Proceedings of the 12th Conference on Automation Science and Engineering, and International Symposium on Assembly and Manufacturing. IEEE, pp. 120-125, INTERNATIONAL SYMPOSIUM ON ASSEMBLY AND MANUFACTURING, 1/01/00. <http://urn.fi/URN:NBN:fi:tty-201609234545>

Formal Resource and Capability Descriptions Supporting Rapid Reconfiguration of Assembly Systems. / Järvenpää, Eeva; Siltala, Niko; Lanz, Minna.
Proceedings of the 12th Conference on Automation Science and Engineering, and International Symposium on Assembly and Manufacturing. IEEE, 2016. p. 120-125.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

TY - GEN

T1 - Formal Resource and Capability Descriptions Supporting Rapid Reconfiguration of Assembly Systems

AU - Järvenpää, Eeva

AU - Siltala, Niko

AU - Lanz, Minna

PY - 2016/8

Y1 - 2016/8

N2 - Today’s production environment is characterised by frequent changes in terms of high product variation, small batch sizes, high demand fluctuation as well as random unexpected disturbances on the factory floor. Production systems need to be rapidly reconfigurable and adaptable to these changing requirements. ReCaM project targets to develop a set of integrated tools for rapid and autonomous reconfiguration of production systems. Such tools need to be supported by formal information models describing the product requirements, as well as resource characteristics and functionalities. This paper concentrates on introducing the formal resource and capability models, which are used and further enriched to support ReCaM targets. Also examples of how these models can be applied to support rapid reconfiguration will be given.

AB - Today’s production environment is characterised by frequent changes in terms of high product variation, small batch sizes, high demand fluctuation as well as random unexpected disturbances on the factory floor. Production systems need to be rapidly reconfigurable and adaptable to these changing requirements. ReCaM project targets to develop a set of integrated tools for rapid and autonomous reconfiguration of production systems. Such tools need to be supported by formal information models describing the product requirements, as well as resource characteristics and functionalities. This paper concentrates on introducing the formal resource and capability models, which are used and further enriched to support ReCaM targets. Also examples of how these models can be applied to support rapid reconfiguration will be given.

M3 - Conference contribution

SP - 120

EP - 125

BT - Proceedings of the 12th Conference on Automation Science and Engineering, and International Symposium on Assembly and Manufacturing

PB - IEEE

T2 - INTERNATIONAL SYMPOSIUM ON ASSEMBLY AND MANUFACTURING

Y2 - 1 January 1900

ER -

Formal Resource and Capability Descriptions Supporting Rapid Reconfiguration of Assembly Systems

Abstract

Conference

Publication forum classification

Access to Document

Fingerprint

Cite this