Skip to main navigation Skip to search Skip to main content

General Current-Reference Generation for Minimum Stator Copper Loss and Torque Ripple Per Operating Point in the Full Torque-Speed Range for Multiphase Nonsalient PMSMs With Arbitrary Back-EMF

  • Alejandro G. Yepes
  • , Mohamed G. Abdel-Moneim
  • , Wessam E. Abdel-Azim
  • , Oscar López
  • , Petros Karamanakos
  • , Ayman S. Abdel-Khalik
  • , Shehab Ahmed
  • , Jesús Doval-Gandoy*
  • *Corresponding author for this work

Research output: Contribution to journal › Article › Scientific › peer-review

5 Downloads (Pure)

Abstract

Multiphase permanent-magnet synchronous machines (PMSMs) present several advantages over conventional three-phase counterparts, such as enhanced torque density and lower phase-current ratings. A recent technique enabled the generation of current references that minimize the stator copper loss (SCL) per torque for multiphase nonsalient PMSM drives with sinusoidal or nonsinusoidal back-electromotive force (back-EMF), while limiting the peak currents (including harmonics) to the inverter maximum instantaneous current even under transient overload. Additionally, it permits reaching higher average torque by tolerating an acceptable level of torque ripple when necessary. Nonetheless, the method ignored the voltage limitations imposed by the DC link, limiting the achievable speed. This article introduces an alternative method for multiphase nonsalient PMSMs based on lookup tables (LUTs), retaining these functionalities while incorporating the voltage constraints into the optimization. This enables the minimization of SCL and torque ripple per mean torque not only across the entire torque range, but throughout the full torque-speed operating region. In fact, the feasible torque-speed range is substantially extended compared with previous methods. To generate the LUTs in a reliable and fast manner, the optimization problem is conveniently formulated as a convex quadratic program. Simulation and experimental results with a six-phase PMSM are provided.

Original languageEnglish
JournalIEEE Transactions on Industrial Electronics
DOIs
Publication statusE-pub ahead of print - 8 Jul 2026
Publication typeA1 Journal article-refereed

Keywords

  • Full-range minimum loss
  • harmonics
  • maximum torque
  • minimum losses
  • multiphase
  • variable speed drives

Publication forum classification

  • Publication forum level 3

Fingerprint

Dive into the research topics of 'General Current-Reference Generation for Minimum Stator Copper Loss and Torque Ripple Per Operating Point in the Full Torque-Speed Range for Multiphase Nonsalient PMSMs With Arbitrary Back-EMF'. Together they form a unique fingerprint.

Cite this