Microstructure-based thermo-mechanical modelling of thermal spray coatings

Giovanni Bolelli, Alessia Candeli, Heli Koivuluoto, Luca Lusvarghi, Tiziano Manfredini, Petri Vuoristo

    Research output: Contribution to journalArticleScientificpeer-review

    31 Citations (Scopus)

    Abstract

    This paper demonstrates how microstructure-based finite element (FE) modelling can be used to interpret and predict the thermo-mechanical behaviour of thermal spray coatings. Validation is obtained by comparison to experimental and/or literature data.

    Finite element meshes are therefore constructed on SEM micrographs of high velocity oxygen-fuel (HVOF)-sprayed hardmetals (WC-CoCr, WC-FeCrAl) and plasma-sprayed Cr2O3, employed as case studies. Uniaxial tensile tests simulated on high-magnification micrographs return micro-scale elastic modulus values in good agreement with depth-sensing Berkovich micro-indentation measurements. At the macro-scale, simulated and experimental three-point bending tests are also in good agreement, capturing the typical size-dependency of the mechanical properties of these materials. The models also predict the progressive stiffening of porous plasma-sprayed Cr2O3 due to crack closure under compressive loading, in agreement with literature reports.

    Refined models of hardmetal coatings, accounting for plastic behaviours and failure stresses, predict crack initiation locations as observed by indentation tests, highlighting the relevance of stress concentrations around microstructural defects (e.g. oxide inclusions).

    Sliding contact simulations between a hardmetal surface and a small spherical asperity reproduce the fundamental processes in tribological pairings. The experimentally observed "wavy'' morphologies of actual wear surfaces are therefore explained by a mechanism of micro-scale plastic flow and matrix extrusion. (C) 2015 Elsevier Ltd. All rights reserved.

    Original languageEnglish
    Pages (from-to)20-34
    Number of pages15
    JournalMaterials and Design
    Volume73
    DOIs
    Publication statusPublished - 15 May 2015
    Publication typeA1 Journal article-refereed

    Keywords

    • Thermal spray
    • Coatings
    • Finite element simulation
    • Microstructure based model
    • Elastic properties
    • Contact simulation
    • METAL-MATRIX COMPOSITES
    • DUAL-PHASE STEEL
    • BARRIER COATINGS
    • ALUMINA COATINGS
    • ELASTIC-MODULUS
    • BEHAVIOR
    • MECHANISMS
    • INDENTATION
    • CONDUCTIVITY
    • SIMULATION

    Publication forum classification

    • Publication forum level 1

    Fingerprint

    Dive into the research topics of 'Microstructure-based thermo-mechanical modelling of thermal spray coatings'. Together they form a unique fingerprint.

    Cite this