New methodology for design, analysis, and validation of DC/DC converters based on advanced controllers

Idris Gadoura; Kai Zenger; Teuvo Suntio; Petri Vallittu

doi:10.1109/INTLEC.1999.794111

New methodology for design, analysis, and validation of DC/DC converters based on advanced controllers

Idris Gadoura^*
, Kai Zenger
, Teuvo Suntio
, Petri Vallittu

^*Corresponding author for this work

Electrical Engineering

Research output: Contribution to journal › Conference article › Scientific › peer-review

7 Citations (Scopus)

Abstract

The DC/DC power converter including the equivalent series resistances (ESR) of output capacitor and inductor has been modeled using state-space representation. The ac-small signal models are derived to obtain the transfer functions of the system to tune the digital PID controller in order in voltage-mode control and current-mode control. The digital PID-controller parameters are optimized to achieve the output system requirements. The variations of the ESR of output capacitor obviously affect on the dynamic of the system and therefore on the tuning parameters of the digital PID controllers. The simulation results show the improvements of the system dynamic using digital PID controller.

Original language	English
Pages (from-to)	23-21
Number of pages	3
Journal	INTELEC, International Telecommunications Energy Conference (Proceedings)
DOIs	https://doi.org/10.1109/INTLEC.1999.794111
Publication status	Published - 1 Dec 1999
Publication type	Not Eligible
Event	Proceedings of the 1999 21st International Telecommunications Energy Conference (INTELEC'99) - Copenhagen, Denmark Duration: 6 Jun 1999 → 9 Jun 1999

ASJC Scopus subject areas

Electrical and Electronic Engineering

Access to Document

10.1109/INTLEC.1999.794111

Cite this

@article{d5a418b1bc404fbb86a4db6bf017d367,

title = "New methodology for design, analysis, and validation of DC/DC converters based on advanced controllers",

abstract = "The DC/DC power converter including the equivalent series resistances (ESR) of output capacitor and inductor has been modeled using state-space representation. The ac-small signal models are derived to obtain the transfer functions of the system to tune the digital PID controller in order in voltage-mode control and current-mode control. The digital PID-controller parameters are optimized to achieve the output system requirements. The variations of the ESR of output capacitor obviously affect on the dynamic of the system and therefore on the tuning parameters of the digital PID controllers. The simulation results show the improvements of the system dynamic using digital PID controller.",

author = "Idris Gadoura and Kai Zenger and Teuvo Suntio and Petri Vallittu",

year = "1999",

month = dec,

day = "1",

doi = "10.1109/INTLEC.1999.794111",

language = "English",

pages = "23--21",

journal = "INTELEC, International Telecommunications Energy Conference (Proceedings)",

issn = "0275-0473",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

note = "Proceedings of the 1999 21st International Telecommunications Energy Conference (INTELEC'99) ; Conference date: 06-06-1999 Through 09-06-1999",

}

TY - JOUR

T1 - New methodology for design, analysis, and validation of DC/DC converters based on advanced controllers

AU - Gadoura, Idris

AU - Zenger, Kai

AU - Suntio, Teuvo

AU - Vallittu, Petri

PY - 1999/12/1

Y1 - 1999/12/1

N2 - The DC/DC power converter including the equivalent series resistances (ESR) of output capacitor and inductor has been modeled using state-space representation. The ac-small signal models are derived to obtain the transfer functions of the system to tune the digital PID controller in order in voltage-mode control and current-mode control. The digital PID-controller parameters are optimized to achieve the output system requirements. The variations of the ESR of output capacitor obviously affect on the dynamic of the system and therefore on the tuning parameters of the digital PID controllers. The simulation results show the improvements of the system dynamic using digital PID controller.

AB - The DC/DC power converter including the equivalent series resistances (ESR) of output capacitor and inductor has been modeled using state-space representation. The ac-small signal models are derived to obtain the transfer functions of the system to tune the digital PID controller in order in voltage-mode control and current-mode control. The digital PID-controller parameters are optimized to achieve the output system requirements. The variations of the ESR of output capacitor obviously affect on the dynamic of the system and therefore on the tuning parameters of the digital PID controllers. The simulation results show the improvements of the system dynamic using digital PID controller.

U2 - 10.1109/INTLEC.1999.794111

DO - 10.1109/INTLEC.1999.794111

M3 - Conference article

AN - SCOPUS:0033347156

SN - 0275-0473

SP - 23

EP - 21

JO - INTELEC, International Telecommunications Energy Conference (Proceedings)

JF - INTELEC, International Telecommunications Energy Conference (Proceedings)

T2 - Proceedings of the 1999 21st International Telecommunications Energy Conference (INTELEC'99)

Y2 - 6 June 1999 through 9 June 1999

ER -

New methodology for design, analysis, and validation of DC/DC converters based on advanced controllers

Abstract

ASJC Scopus subject areas

Access to Document

Fingerprint

Cite this