Printed, skin-mounted hybrid system for ECG measurements

Tiina Vuorinen; Antti Vehkaoja; Vala Jeyhani; Kai Noponen; Augustine Onubeze; Timo Kankkunen; Anna-Kaisa Puuronen; Sampo Nurmentaus; Preejith S. P.; Jayaraj Joseph; Tapio Seppänen; Mohanasankar Sivaprakasam; Matti Mäntysalo

doi:10.1109/ESTC.2016.7764710

Printed, skin-mounted hybrid system for ECG measurements

Tiina Vuorinen, Antti Vehkaoja, Vala Jeyhani, Kai Noponen, Augustine Onubeze, Timo Kankkunen, Anna-Kaisa Puuronen, Sampo Nurmentaus, Preejith S. P., Jayaraj Joseph, Tapio Seppänen, Mohanasankar Sivaprakasam, Matti Mäntysalo

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

12 Citations (Scopus)

41 Downloads (Pure)

Abstract

In this paper we report a design and fabrication process for a screen printed, skin-mounted hybrid system for electrocardiogram (ECG) measurements. The system consists of printed electrodes on a stretchable bandage substrate designed to be attached to the chest, an electronics module, and a data receiving device. The electronics unit is reversibly attached to the single-use electrode bandage to measure the ECG data. The ECG data is then transmitted to a mobile device via Bluetooth Low Energy and the mobile device then displays the data graphically and sends it further a cloud for storing and further analysis. The attained quality of the measured ECG signals is fully satisfactory to compute important cardiac parameters and after preprocessing the signal could be used for more profound analysis of ECG wave shapes.

Original language	English
Title of host publication	2016 6th Electronic System-Integration Technology Conference (ESTC)
Publisher	IEEE
Pages	1-6
Number of pages	6
ISBN (Electronic)	978-1-5090-1402-6
DOIs	https://doi.org/10.1109/ESTC.2016.7764710
Publication status	Published - 5 Dec 2016
Publication type	A4 Article in conference proceedings
Event	Electronics System-Integration Technology Conference - Duration: 1 Jan 2014 → …

Conference

Conference	Electronics System-Integration Technology Conference
Period	1/01/14 → …

Keywords

Bluetooth
Electrocardiography
Electrodes
Lead
Mobile handsets
Monitoring
Standards

Publication forum classification

Publication forum level 1

Access to Document

10.1109/ESTC.2016.7764710

2016-ESTC2016
This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Accepted author manuscript, 771 KB

http://urn.fi/URN:NBN:fi:tuni-202009026854

Cite this

Vuorinen, T., Vehkaoja, A., Jeyhani, V., Noponen, K., Onubeze, A., Kankkunen, T., Puuronen, A.-K., Nurmentaus, S., P., P. S., Joseph, J., Seppänen, T., Sivaprakasam, M., & Mäntysalo, M. (2016). Printed, skin-mounted hybrid system for ECG measurements. In 2016 6th Electronic System-Integration Technology Conference (ESTC) (pp. 1-6). IEEE. https://doi.org/10.1109/ESTC.2016.7764710

@inproceedings{d49baf83012a4d00a8a517910fcd3c35,

title = "Printed, skin-mounted hybrid system for ECG measurements",

abstract = "In this paper we report a design and fabrication process for a screen printed, skin-mounted hybrid system for electrocardiogram (ECG) measurements. The system consists of printed electrodes on a stretchable bandage substrate designed to be attached to the chest, an electronics module, and a data receiving device. The electronics unit is reversibly attached to the single-use electrode bandage to measure the ECG data. The ECG data is then transmitted to a mobile device via Bluetooth Low Energy and the mobile device then displays the data graphically and sends it further a cloud for storing and further analysis. The attained quality of the measured ECG signals is fully satisfactory to compute important cardiac parameters and after preprocessing the signal could be used for more profound analysis of ECG wave shapes.",

keywords = "Bluetooth, Electrocardiography, Electrodes, Lead, Mobile handsets, Monitoring, Standards",

author = "Tiina Vuorinen and Antti Vehkaoja and Vala Jeyhani and Kai Noponen and Augustine Onubeze and Timo Kankkunen and Anna-Kaisa Puuronen and Sampo Nurmentaus and P., {Preejith S.} and Jayaraj Joseph and Tapio Sepp{\"a}nen and Mohanasankar Sivaprakasam and Matti M{\"a}ntysalo",

note = "INT=ase,{"}Jeyhani, Vala{"} INT=elt,{"}Kankkunen, Timo{"}; Electronics System-Integration Technology Conference ; Conference date: 01-01-2014",

year = "2016",

month = dec,

day = "5",

doi = "10.1109/ESTC.2016.7764710",

language = "English",

pages = "1--6",

booktitle = "2016 6th Electronic System-Integration Technology Conference (ESTC)",

publisher = "IEEE",

address = "United States",

}

Vuorinen, T, Vehkaoja, A, Jeyhani, V, Noponen, K, Onubeze, A, Kankkunen, T, Puuronen, A-K, Nurmentaus, S, P., PS, Joseph, J, Seppänen, T, Sivaprakasam, M & Mäntysalo, M 2016, Printed, skin-mounted hybrid system for ECG measurements. in 2016 6th Electronic System-Integration Technology Conference (ESTC). IEEE, pp. 1-6, Electronics System-Integration Technology Conference, 1/01/14. https://doi.org/10.1109/ESTC.2016.7764710

TY - GEN

T1 - Printed, skin-mounted hybrid system for ECG measurements

AU - Vuorinen, Tiina

AU - Vehkaoja, Antti

AU - Jeyhani, Vala

AU - Noponen, Kai

AU - Onubeze, Augustine

AU - Kankkunen, Timo

AU - Puuronen, Anna-Kaisa

AU - Nurmentaus, Sampo

AU - P., Preejith S.

AU - Joseph, Jayaraj

AU - Seppänen, Tapio

AU - Sivaprakasam, Mohanasankar

AU - Mäntysalo, Matti

N1 - INT=ase,"Jeyhani, Vala" INT=elt,"Kankkunen, Timo"

PY - 2016/12/5

Y1 - 2016/12/5

N2 - In this paper we report a design and fabrication process for a screen printed, skin-mounted hybrid system for electrocardiogram (ECG) measurements. The system consists of printed electrodes on a stretchable bandage substrate designed to be attached to the chest, an electronics module, and a data receiving device. The electronics unit is reversibly attached to the single-use electrode bandage to measure the ECG data. The ECG data is then transmitted to a mobile device via Bluetooth Low Energy and the mobile device then displays the data graphically and sends it further a cloud for storing and further analysis. The attained quality of the measured ECG signals is fully satisfactory to compute important cardiac parameters and after preprocessing the signal could be used for more profound analysis of ECG wave shapes.

AB - In this paper we report a design and fabrication process for a screen printed, skin-mounted hybrid system for electrocardiogram (ECG) measurements. The system consists of printed electrodes on a stretchable bandage substrate designed to be attached to the chest, an electronics module, and a data receiving device. The electronics unit is reversibly attached to the single-use electrode bandage to measure the ECG data. The ECG data is then transmitted to a mobile device via Bluetooth Low Energy and the mobile device then displays the data graphically and sends it further a cloud for storing and further analysis. The attained quality of the measured ECG signals is fully satisfactory to compute important cardiac parameters and after preprocessing the signal could be used for more profound analysis of ECG wave shapes.

KW - Bluetooth

KW - Electrocardiography

KW - Electrodes

KW - Lead

KW - Mobile handsets

KW - Monitoring

KW - Standards

U2 - 10.1109/ESTC.2016.7764710

DO - 10.1109/ESTC.2016.7764710

M3 - Conference contribution

SP - 1

EP - 6

BT - 2016 6th Electronic System-Integration Technology Conference (ESTC)

PB - IEEE

T2 - Electronics System-Integration Technology Conference

Y2 - 1 January 2014

ER -

Printed, skin-mounted hybrid system for ECG measurements

Abstract

Conference

Keywords

Publication forum classification

Access to Document

Fingerprint

Cite this