Using IR-thermography as a quality-control tool for thermal spraying in the aircraft industry

Petri Jokinen; Timo Kauppinen; Tommi Varis; Kari Korpiola

Using IR-thermography as a quality-control tool for thermal spraying in the aircraft industry

Petri Jokinen, Timo Kauppinen, Tommi Varis, Kari Korpiola

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

1 Citation (Scopus)

Abstract

One of the main parameters affecting on the coating quality in thermal spraying is the temperature of the workpiece. The in-situ temperature control of the workpiece is especially important while spraying small and thin products made of aluminum, plastics and composites used in aerospace industry. By installing thermal image equipment to the thermal spray system the in-situ measurement of workpiece temperature is possible.

Original language	English
Title of host publication	Proceedings of SPIE - The International Society for Optical Engineering
Pages	232-237
Number of pages	6
Volume	4020
Publication status	Published - 2000
Externally published	Yes
Publication type	A4 Article in conference proceedings
Event	Thermosense XXII - Orlando, FL, USA Duration: 24 Apr 2000 → 27 Apr 2000

Publication series

Name	Proceedings of SPIE - The International Society for Optical Engineering
Publisher	Society of Photo-optical Instrumentation Engineers
ISSN (Print)	0277-786X

Conference

Conference	Thermosense XXII
City	Orlando, FL, USA
Period	24/04/00 → 27/04/00

ASJC Scopus subject areas

Electronic, Optical and Magnetic Materials
Condensed Matter Physics
Computer Science Applications
Applied Mathematics
Electrical and Electronic Engineering

Cite this

@inproceedings{fbb453db87b849ba9cf540cead0f36a1,

title = "Using IR-thermography as a quality-control tool for thermal spraying in the aircraft industry",

abstract = "One of the main parameters affecting on the coating quality in thermal spraying is the temperature of the workpiece. The in-situ temperature control of the workpiece is especially important while spraying small and thin products made of aluminum, plastics and composites used in aerospace industry. By installing thermal image equipment to the thermal spray system the in-situ measurement of workpiece temperature is possible.",

author = "Petri Jokinen and Timo Kauppinen and Tommi Varis and Kari Korpiola",

year = "2000",

language = "English",

volume = "4020",

series = "Proceedings of SPIE - The International Society for Optical Engineering",

publisher = "Society of Photo-optical Instrumentation Engineers",

pages = "232--237",

booktitle = "Proceedings of SPIE - The International Society for Optical Engineering",

note = "Thermosense XXII ; Conference date: 24-04-2000 Through 27-04-2000",

}

Using IR-thermography as a quality-control tool for thermal spraying in the aircraft industry. / Jokinen, Petri; Kauppinen, Timo; Varis, Tommi et al.
Proceedings of SPIE - The International Society for Optical Engineering. Vol. 4020 2000. p. 232-237 (Proceedings of SPIE - The International Society for Optical Engineering).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Scientific › peer-review

TY - GEN

T1 - Using IR-thermography as a quality-control tool for thermal spraying in the aircraft industry

AU - Jokinen, Petri

AU - Kauppinen, Timo

AU - Varis, Tommi

AU - Korpiola, Kari

PY - 2000

Y1 - 2000

N2 - One of the main parameters affecting on the coating quality in thermal spraying is the temperature of the workpiece. The in-situ temperature control of the workpiece is especially important while spraying small and thin products made of aluminum, plastics and composites used in aerospace industry. By installing thermal image equipment to the thermal spray system the in-situ measurement of workpiece temperature is possible.

AB - One of the main parameters affecting on the coating quality in thermal spraying is the temperature of the workpiece. The in-situ temperature control of the workpiece is especially important while spraying small and thin products made of aluminum, plastics and composites used in aerospace industry. By installing thermal image equipment to the thermal spray system the in-situ measurement of workpiece temperature is possible.

UR - http://www.scopus.com/inward/record.url?scp=0033700574&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0033700574

VL - 4020

T3 - Proceedings of SPIE - The International Society for Optical Engineering

SP - 232

EP - 237

BT - Proceedings of SPIE - The International Society for Optical Engineering

T2 - Thermosense XXII

Y2 - 24 April 2000 through 27 April 2000

ER -

Using IR-thermography as a quality-control tool for thermal spraying in the aircraft industry

Abstract

Publication series

Conference

ASJC Scopus subject areas

Other files and links

Fingerprint

Cite this