Tutkimustuotoksia vuodessa
Tutkimustuotoksia vuodessa
Laitteiden yksityiskohdat
Kuvaus
Laboratory for Future Electronics (LFE) investigates technologies and solutions related to energy-autonomy (storage and harvesting), sensors, conformably wearable electronics (soft/stretchable, on-skin, textile), and hybrid system integration.
Strong emphasis is placed on scalable, low-cost manufacturing methods such as printing as well as the integration of printed components and circuits with more conventional component assembly methods.
LFE is a part of Printed Intelligence Infrastructure (PII). PII is a distributed infrastructure between University of Oulu, Tampere University, Åbo Akademi, and VTT supported by Academy of Finland.
LFE explores new device and circuit approaches based on printable organic and metal oxide semiconductors
Strong emphasis is placed on scalable, low-cost manufacturing methods such as printing as well as the integration of printed components and circuits with more conventional component assembly methods.
LFE is a part of Printed Intelligence Infrastructure (PII). PII is a distributed infrastructure between University of Oulu, Tampere University, Åbo Akademi, and VTT supported by Academy of Finland.
LFE explores new device and circuit approaches based on printable organic and metal oxide semiconductors
×
![]()
Sormenjälki
Tutustu tutkimusalueisiin, joilla tätä laitetta on käytetty. Nämä merkinnät luodaan niihin liittyvien tuotosten perusteella. Yhdessä ne muodostavat ainutlaatuisen sormenjäljen.
-
A combination of experimental and numerical method for optimizing the sensitivity of ultra-thin piezoelectric sensor with interdigitated electrodes
Laurila, M-M., Lozano Montero, K. & Mäntysalo, M., 2023, julkaisussa: Flexible and Printed Electronics. 8, 1, 015006.Tutkimustuotos: Artikkeli › Scientific › vertaisarvioitu
Open accessTiedosto1 Lataukset (Pure) -
A Modified Exponential Equivalent Parallel Resistance (EPR) Model for Predicting Self-Discharge Behavior of Printed Flexible Supercapacitors
Pourkheirollah, H., Keskinen, J., Lupo, D. & Mäntysalo, M., 2022, 2022 IEEE 9th Electronics System-Integration Technology Conference (ESTC). IEEE, s. 264-268 5 SivumääräTutkimustuotos: Konferenssiartikkeli › Scientific › vertaisarvioitu
Open accessTiedosto9 Lataukset (Pure) -
An improved exponential model for charge and discharge behavior of printed supercapacitor modules under varying load conditions
Pourkheirollah, H., Keskinen, J., Mäntysalo, M. & Lupo, D., 20 huhtik. 2022, julkaisussa: Journal of Power Sources. 535, 12 Sivumäärä, 231475.Tutkimustuotos: Artikkeli › Scientific › vertaisarvioitu
Open accessTiedosto19 Lataukset (Pure)