3D-Printed Graphene Antennas and Interconnections for Textile RFID Tags: Fabrication and Reliability towards Humidity

Han He; Mitra Akbari; Lauri Sydänheimo; Leena Ukkonen; Johanna Virkki

doi:10.1155/2017/1386017

3D-Printed Graphene Antennas and Interconnections for Textile RFID Tags: Fabrication and Reliability towards Humidity

Han He, Mitra Akbari, Lauri Sydänheimo, Leena Ukkonen, Johanna Virkki

Tutkimustuotos: Artikkeli › Scientific › vertaisarvioitu

8 Sitaatiot (Scopus)

62 Lataukset (Pure)

Abstrakti

We present the possibilities of 3D direct-write dispensing in the fabrication of passive UHF RFID graphene tags on a textile substrate. In our method, the graphene tag antenna is deposited directly on top of the IC strap, in order to simplify the manufacturing process by removing one step, that is, the IC attachment with conductive glue. Our wireless measurement results confirm that graphene RFID tags with printed antenna-IC interconnections achieve peak read ranges of 5.2 meters, which makes them comparable to graphene tags with epoxy-glued ICs. After keeping the tags in high humidity, the read ranges of the tags with epoxy-glued and printed antenna-IC interconnections decrease 0.8 meters and 0.5 meters, respectively. However, after drying, the performance of both types of tags returns back to normal.

Alkuperäiskieli	Englanti
Julkaisu	International Journal of Antennas and Propagation
DOI - pysyväislinkit	https://doi.org/10.1155/2017/1386017
Tila	Julkaistu - 5 kesäk. 2017
OKM-julkaisutyyppi	A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Julkaisufoorumi-taso

Jufo-taso 1

Pääsy asiakirjaan

10.1155/2017/1386017

he et al. 2017
Copyright © 2017 Han He et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Final published version, 2,61 MBLisenssi: CC BY

http://urn.fi/URN:NBN:fi:tty-201706091588

Siteeraa tätä

@article{e06fafa444bd4d8d8289951e2cf89157,

title = "3D-Printed Graphene Antennas and Interconnections for Textile RFID Tags: Fabrication and Reliability towards Humidity",

abstract = "We present the possibilities of 3D direct-write dispensing in the fabrication of passive UHF RFID graphene tags on a textile substrate. In our method, the graphene tag antenna is deposited directly on top of the IC strap, in order to simplify the manufacturing process by removing one step, that is, the IC attachment with conductive glue. Our wireless measurement results confirm that graphene RFID tags with printed antenna-IC interconnections achieve peak read ranges of 5.2 meters, which makes them comparable to graphene tags with epoxy-glued ICs. After keeping the tags in high humidity, the read ranges of the tags with epoxy-glued and printed antenna-IC interconnections decrease 0.8 meters and 0.5 meters, respectively. However, after drying, the performance of both types of tags returns back to normal.",

author = "Han He and Mitra Akbari and Lauri Syd{\"a}nheimo and Leena Ukkonen and Johanna Virkki",

year = "2017",

month = jun,

day = "5",

doi = "10.1155/2017/1386017",

language = "English",

journal = "International Journal of Antennas and Propagation",

issn = "1687-5869",

publisher = "Hindawi Publishing Corporation",

}

TY - JOUR

T1 - 3D-Printed Graphene Antennas and Interconnections for Textile RFID Tags

T2 - Fabrication and Reliability towards Humidity

AU - He, Han

AU - Akbari, Mitra

AU - Sydänheimo, Lauri

AU - Ukkonen, Leena

AU - Virkki, Johanna

PY - 2017/6/5

Y1 - 2017/6/5

N2 - We present the possibilities of 3D direct-write dispensing in the fabrication of passive UHF RFID graphene tags on a textile substrate. In our method, the graphene tag antenna is deposited directly on top of the IC strap, in order to simplify the manufacturing process by removing one step, that is, the IC attachment with conductive glue. Our wireless measurement results confirm that graphene RFID tags with printed antenna-IC interconnections achieve peak read ranges of 5.2 meters, which makes them comparable to graphene tags with epoxy-glued ICs. After keeping the tags in high humidity, the read ranges of the tags with epoxy-glued and printed antenna-IC interconnections decrease 0.8 meters and 0.5 meters, respectively. However, after drying, the performance of both types of tags returns back to normal.

AB - We present the possibilities of 3D direct-write dispensing in the fabrication of passive UHF RFID graphene tags on a textile substrate. In our method, the graphene tag antenna is deposited directly on top of the IC strap, in order to simplify the manufacturing process by removing one step, that is, the IC attachment with conductive glue. Our wireless measurement results confirm that graphene RFID tags with printed antenna-IC interconnections achieve peak read ranges of 5.2 meters, which makes them comparable to graphene tags with epoxy-glued ICs. After keeping the tags in high humidity, the read ranges of the tags with epoxy-glued and printed antenna-IC interconnections decrease 0.8 meters and 0.5 meters, respectively. However, after drying, the performance of both types of tags returns back to normal.

U2 - 10.1155/2017/1386017

DO - 10.1155/2017/1386017

M3 - Article

SN - 1687-5869

JO - International Journal of Antennas and Propagation

JF - International Journal of Antennas and Propagation

ER -

3D-Printed Graphene Antennas and Interconnections for Textile RFID Tags: Fabrication and Reliability towards Humidity

Abstrakti

Julkaisufoorumi-taso

Pääsy asiakirjaan

Sormenjälki

Siteeraa tätä