A survey of printable piezoelectric sensors

Sampo Tuukkanen; Satu Rajala

doi:10.1109/ICSENS.2015.7370542

A survey of printable piezoelectric sensors

Sampo Tuukkanen
, Satu Rajala

Tutkimustuotos: Konferenssiartikkeli › Tieteellinen › vertaisarvioitu

19 Sitaatiot (Scopus)

832 Lataukset (Pure)

Abstrakti

Availability of solution-processable piezoelectric sensor and electrode materials enable low-cost and high-throughput fabrication of fully printable piezoelectric sensors. Results obtained with piezoelectric polymer (polyvinylidenefluoride, PVDF), cellulose nanofibril (CNF) and cellulose nanocrystal (CNC) films as sensor materials are presented here. These sensor materials can be processed in solution and used in combination with printed electrodes to obtain full printability of the sensors. A commercial PVDF film and in-house fabricated CNF and CNC film are used as sensor materials. In addition, conducting polymer, graphene and carbon nanotube (CNT) based inks are used as solution-processable electrode materials in the sensors, whereas conventional metallic
electrodes are used as reference electrode material. The sensor operation of the fabricated sensors is evaluated through piezoelectric sensitivity measurements. The sensor sensitivity measurements revealed mean sensitivities from 2 pC/N to 42 pC/N in transverse direction, depending on set of the sensor and electrode materials used.

Alkuperäiskieli	Englanti
Otsikko	IEEE Sensors 2015 Conference Proceedings
Kustantaja	IEEE
Sivut	1426-1429
Sivumäärä	4
ISBN (elektroninen)	978-1-4799-8202-8
DOI - pysyväislinkit	https://doi.org/10.1109/ICSENS.2015.7370542
Tila	Julkaistu - 27 lokak. 2015
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisussa
Tapahtuma	IEEE SENSORS: PROCEEDINGS - Kesto: 1 tammik. 1900 → …

Conference

Conference	IEEE SENSORS: PROCEEDINGS
Ajanjakso	1/01/00 → …

Julkaisufoorumi-taso

Jufo-taso 1

Pääsy asiakirjaan

10.1109/ICSENS.2015.7370542

Tuukkanen_IEEE_Sensors_2015_
© 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
Accepted author manuscript, 459 KB

http://urn.fi/URN:NBN:fi:tty-201603183701

Nanocellulose based piezoelectric sensors
Tuukkanen, S. (Speaker)
30 maalisk. 2016
Aktiviteetti: Konferenssiesitelmä

Tiedosto

Structural and Electrical Characterization of Solution-Processed Electrodes for Piezoelectric Polymer Film Sensors
Rajala, S., Mettänen, M. & Tuukkanen, S., 15 maalisk. 2016, julkaisussa: IEEE Sensors Journal. 16, 6, s. 1692-1699 8 Sivumäärä
Tutkimustuotos: Artikkeli › Tieteellinen › vertaisarvioitu

Open access
Tiedosto
23 Sitaatiot (Scopus)

275 Lataukset (Pure)

Siteeraa tätä

@inproceedings{e0557ce772ec49dfb2ddd43a61fb3c54,

title = "A survey of printable piezoelectric sensors",

abstract = "Availability of solution-processable piezoelectric sensor and electrode materials enable low-cost and high-throughput fabrication of fully printable piezoelectric sensors. Results obtained with piezoelectric polymer (polyvinylidenefluoride, PVDF), cellulose nanofibril (CNF) and cellulose nanocrystal (CNC) films as sensor materials are presented here. These sensor materials can be processed in solution and used in combination with printed electrodes to obtain full printability of the sensors. A commercial PVDF film and in-house fabricated CNF and CNC film are used as sensor materials. In addition, conducting polymer, graphene and carbon nanotube (CNT) based inks are used as solution-processable electrode materials in the sensors, whereas conventional metallic electrodes are used as reference electrode material. The sensor operation of the fabricated sensors is evaluated through piezoelectric sensitivity measurements. The sensor sensitivity measurements revealed mean sensitivities from 2 pC/N to 42 pC/N in transverse direction, depending on set of the sensor and electrode materials used. ",

author = "Sampo Tuukkanen and Satu Rajala",

note = "Versio ja lupa kunnossa 14.1.2016 KK ; IEEE Sensors: Proceedings ; Conference date: 01-01-1900",

year = "2015",

month = oct,

day = "27",

doi = "10.1109/ICSENS.2015.7370542",

language = "English",

pages = "1426--1429",

booktitle = "IEEE Sensors 2015 Conference Proceedings",

publisher = "IEEE",

address = "United States",

}

TY - GEN

T1 - A survey of printable piezoelectric sensors

AU - Tuukkanen, Sampo

AU - Rajala, Satu

N1 - Versio ja lupa kunnossa 14.1.2016 KK

PY - 2015/10/27

Y1 - 2015/10/27

N2 - Availability of solution-processable piezoelectric sensor and electrode materials enable low-cost and high-throughput fabrication of fully printable piezoelectric sensors. Results obtained with piezoelectric polymer (polyvinylidenefluoride, PVDF), cellulose nanofibril (CNF) and cellulose nanocrystal (CNC) films as sensor materials are presented here. These sensor materials can be processed in solution and used in combination with printed electrodes to obtain full printability of the sensors. A commercial PVDF film and in-house fabricated CNF and CNC film are used as sensor materials. In addition, conducting polymer, graphene and carbon nanotube (CNT) based inks are used as solution-processable electrode materials in the sensors, whereas conventional metallic electrodes are used as reference electrode material. The sensor operation of the fabricated sensors is evaluated through piezoelectric sensitivity measurements. The sensor sensitivity measurements revealed mean sensitivities from 2 pC/N to 42 pC/N in transverse direction, depending on set of the sensor and electrode materials used.

AB - Availability of solution-processable piezoelectric sensor and electrode materials enable low-cost and high-throughput fabrication of fully printable piezoelectric sensors. Results obtained with piezoelectric polymer (polyvinylidenefluoride, PVDF), cellulose nanofibril (CNF) and cellulose nanocrystal (CNC) films as sensor materials are presented here. These sensor materials can be processed in solution and used in combination with printed electrodes to obtain full printability of the sensors. A commercial PVDF film and in-house fabricated CNF and CNC film are used as sensor materials. In addition, conducting polymer, graphene and carbon nanotube (CNT) based inks are used as solution-processable electrode materials in the sensors, whereas conventional metallic electrodes are used as reference electrode material. The sensor operation of the fabricated sensors is evaluated through piezoelectric sensitivity measurements. The sensor sensitivity measurements revealed mean sensitivities from 2 pC/N to 42 pC/N in transverse direction, depending on set of the sensor and electrode materials used.

U2 - 10.1109/ICSENS.2015.7370542

DO - 10.1109/ICSENS.2015.7370542

M3 - Conference contribution

SP - 1426

EP - 1429

BT - IEEE Sensors 2015 Conference Proceedings

PB - IEEE

T2 - IEEE Sensors: Proceedings

Y2 - 1 January 1900

ER -

A survey of printable piezoelectric sensors

Abstrakti

Conference

Julkaisufoorumi-taso

Pääsy asiakirjaan

Sormenjälki

Aktiviteetit

Nanocellulose based piezoelectric sensors

Tutkimustuotos

Structural and Electrical Characterization of Solution-Processed Electrodes for Piezoelectric Polymer Film Sensors

Siteeraa tätä