Accelerator-quality HTS dipole magnet demonstrator designs for the EuCARD-2 5-T 40-mm clear aperture magnet

G. A. Kirby; J. Van Nugteren; A. Ballarino; L. Bottura; N. Chouika; S. Clement; V. Datskov; L. Fajardo; J. Fleiter; R. Gauthier; L. Gentini; L. Lambert; M. Lopes; J. C. Perez; G. De Rijk; A. Rijllart; L. Rossi; H. Ten Kate; M. Durante; P. Fazilleau; C. Lorin; E. Härö; A. Stenvall; S. Caspi; M. Marchevsky; W. Goldacker; A. Kario

doi:10.1109/TASC.2014.2361933

Accelerator-quality HTS dipole magnet demonstrator designs for the EuCARD-2 5-T 40-mm clear aperture magnet

G. A. Kirby, J. Van Nugteren, A. Ballarino, L. Bottura, N. Chouika, S. Clement, V. Datskov, L. Fajardo, J. Fleiter, R. Gauthier, L. Gentini, L. Lambert, M. Lopes, J. C. Perez, G. De Rijk, A. Rijllart, L. Rossi, H. Ten Kate, M. Durante, P. FazilleauC. Lorin, E. Härö, A. Stenvall, S. Caspi, M. Marchevsky, W. Goldacker, A. Kario

Tutkimustuotos: Artikkeli › Tieteellinen › vertaisarvioitu

75 Sitaatiot (Scopus)

Abstrakti

Future high-energy accelerators will need very high magnetic fields in the range of 20 T. The Enhanced European Coordination for Accelerator Research and Development (EuCARD-2) Work Package 10 is a collaborative push to take high-temperature superconductor (HTS) materials into an accelerator-quality demonstrator magnet. The demonstrator will produce 5 T stand alone and between 17 and 20 T when inserted into the 100-mm aperture of a Fresca-2 high-field outsert magnet. The HTS magnet will demonstrate the field strength and the field quality that can be achieved. An effective quench detection and protection system will have to be developed to operate with the HTS superconducting materials. This paper presents a ReBCO magnet design using a multistrand Roebel cable that develops a stand-alone field of 5 T in a 40-mm clear aperture and discusses the challenges associated with a good field quality using this type of material. A selection of magnet designs is presented as the result of the first phase of development.

Alkuperäiskieli	Englanti
Artikkeli	4000805
Julkaisu	IEEE Transactions on Applied Superconductivity
Vuosikerta	25
Numero	3
DOI - pysyväislinkit	https://doi.org/10.1109/TASC.2014.2361933
Tila	Julkaistu - 1 kesäk. 2015
OKM-julkaisutyyppi	A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Julkaisufoorumi-taso

Jufo-taso 1

!!ASJC Scopus subject areas

Electrical and Electronic Engineering
Condensed Matter Physics
Electronic, Optical and Magnetic Materials

Pääsy asiakirjaan

10.1109/TASC.2014.2361933

Siteeraa tätä

Kirby, G. A., Van Nugteren, J., Ballarino, A., Bottura, L., Chouika, N., Clement, S., Datskov, V., Fajardo, L., Fleiter, J., Gauthier, R., Gentini, L., Lambert, L., Lopes, M., Perez, J. C., De Rijk, G., Rijllart, A., Rossi, L., Ten Kate, H., Durante, M., ... Kario, A. (2015). Accelerator-quality HTS dipole magnet demonstrator designs for the EuCARD-2 5-T 40-mm clear aperture magnet. IEEE Transactions on Applied Superconductivity, 25(3), Artikkeli 4000805. https://doi.org/10.1109/TASC.2014.2361933

@article{4fd27057663c475286b2767ddd0598b5,

title = "Accelerator-quality HTS dipole magnet demonstrator designs for the EuCARD-2 5-T 40-mm clear aperture magnet",

abstract = "Future high-energy accelerators will need very high magnetic fields in the range of 20 T. The Enhanced European Coordination for Accelerator Research and Development (EuCARD-2) Work Package 10 is a collaborative push to take high-temperature superconductor (HTS) materials into an accelerator-quality demonstrator magnet. The demonstrator will produce 5 T stand alone and between 17 and 20 T when inserted into the 100-mm aperture of a Fresca-2 high-field outsert magnet. The HTS magnet will demonstrate the field strength and the field quality that can be achieved. An effective quench detection and protection system will have to be developed to operate with the HTS superconducting materials. This paper presents a ReBCO magnet design using a multistrand Roebel cable that develops a stand-alone field of 5 T in a 40-mm clear aperture and discusses the challenges associated with a good field quality using this type of material. A selection of magnet designs is presented as the result of the first phase of development.",

keywords = "Accelerator magnet, EuCARD-2, HTS magnet design, quench protection, ReBCO, Superconducting Magnets, YBCO Roebel cable",

author = "Kirby, {G. A.} and {Van Nugteren}, J. and A. Ballarino and L. Bottura and N. Chouika and S. Clement and V. Datskov and L. Fajardo and J. Fleiter and R. Gauthier and L. Gentini and L. Lambert and M. Lopes and Perez, {J. C.} and {De Rijk}, G. and A. Rijllart and L. Rossi and {Ten Kate}, H. and M. Durante and P. Fazilleau and C. Lorin and E. H{\"a}r{\"o} and A. Stenvall and S. Caspi and M. Marchevsky and W. Goldacker and A. Kario",

year = "2015",

month = jun,

day = "1",

doi = "10.1109/TASC.2014.2361933",

language = "English",

volume = "25",

journal = "IEEE Transactions on Applied Superconductivity",

issn = "1051-8223",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "3",

}

Kirby, GA, Van Nugteren, J, Ballarino, A, Bottura, L, Chouika, N, Clement, S, Datskov, V, Fajardo, L, Fleiter, J, Gauthier, R, Gentini, L, Lambert, L, Lopes, M, Perez, JC, De Rijk, G, Rijllart, A, Rossi, L, Ten Kate, H, Durante, M, Fazilleau, P, Lorin, C, Härö, E, Stenvall, A, Caspi, S, Marchevsky, M, Goldacker, W & Kario, A 2015, 'Accelerator-quality HTS dipole magnet demonstrator designs for the EuCARD-2 5-T 40-mm clear aperture magnet', IEEE Transactions on Applied Superconductivity, Vuosikerta 25, Nro 3, 4000805. https://doi.org/10.1109/TASC.2014.2361933

TY - JOUR

T1 - Accelerator-quality HTS dipole magnet demonstrator designs for the EuCARD-2 5-T 40-mm clear aperture magnet

AU - Kirby, G. A.

AU - Van Nugteren, J.

AU - Ballarino, A.

AU - Bottura, L.

AU - Chouika, N.

AU - Clement, S.

AU - Datskov, V.

AU - Fajardo, L.

AU - Fleiter, J.

AU - Gauthier, R.

AU - Gentini, L.

AU - Lambert, L.

AU - Lopes, M.

AU - Perez, J. C.

AU - De Rijk, G.

AU - Rijllart, A.

AU - Rossi, L.

AU - Ten Kate, H.

AU - Durante, M.

AU - Fazilleau, P.

AU - Lorin, C.

AU - Härö, E.

AU - Stenvall, A.

AU - Caspi, S.

AU - Marchevsky, M.

AU - Goldacker, W.

AU - Kario, A.

PY - 2015/6/1

Y1 - 2015/6/1

N2 - Future high-energy accelerators will need very high magnetic fields in the range of 20 T. The Enhanced European Coordination for Accelerator Research and Development (EuCARD-2) Work Package 10 is a collaborative push to take high-temperature superconductor (HTS) materials into an accelerator-quality demonstrator magnet. The demonstrator will produce 5 T stand alone and between 17 and 20 T when inserted into the 100-mm aperture of a Fresca-2 high-field outsert magnet. The HTS magnet will demonstrate the field strength and the field quality that can be achieved. An effective quench detection and protection system will have to be developed to operate with the HTS superconducting materials. This paper presents a ReBCO magnet design using a multistrand Roebel cable that develops a stand-alone field of 5 T in a 40-mm clear aperture and discusses the challenges associated with a good field quality using this type of material. A selection of magnet designs is presented as the result of the first phase of development.

AB - Future high-energy accelerators will need very high magnetic fields in the range of 20 T. The Enhanced European Coordination for Accelerator Research and Development (EuCARD-2) Work Package 10 is a collaborative push to take high-temperature superconductor (HTS) materials into an accelerator-quality demonstrator magnet. The demonstrator will produce 5 T stand alone and between 17 and 20 T when inserted into the 100-mm aperture of a Fresca-2 high-field outsert magnet. The HTS magnet will demonstrate the field strength and the field quality that can be achieved. An effective quench detection and protection system will have to be developed to operate with the HTS superconducting materials. This paper presents a ReBCO magnet design using a multistrand Roebel cable that develops a stand-alone field of 5 T in a 40-mm clear aperture and discusses the challenges associated with a good field quality using this type of material. A selection of magnet designs is presented as the result of the first phase of development.

KW - Accelerator magnet

KW - EuCARD-2

KW - HTS magnet design

KW - quench protection

KW - ReBCO

KW - Superconducting Magnets

KW - YBCO Roebel cable

U2 - 10.1109/TASC.2014.2361933

DO - 10.1109/TASC.2014.2361933

M3 - Article

AN - SCOPUS:84920829736

SN - 1051-8223

VL - 25

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

IS - 3

M1 - 4000805

ER -

Accelerator-quality HTS dipole magnet demonstrator designs for the EuCARD-2 5-T 40-mm clear aperture magnet

Abstrakti

Julkaisufoorumi-taso

!!ASJC Scopus subject areas

Pääsy asiakirjaan

Sormenjälki

Siteeraa tätä