Achieving a slippery, liquid-infused porous surface with anti-icing properties by direct deposition of flame synthesized aerosol nanoparticles on a thermally fragile substrate

Paxton Juuti, Janne Haapanen, Christian Stenroos, Henna Niemelä-Anttonen, Juha Harra, Heli Koivuluoto, Hannu Teisala, Johanna Lahti, Mikko Tuominen, Jurkka Kuusipalo, Petri Vuoristo, Jyrki M. Mäkelä

    Tutkimustuotos: ArtikkeliScientificvertaisarvioitu

    35 Sitaatiot (Scopus)
    139 Lataukset (Pure)

    Abstrakti

    Slippery, liquid-infused porous surfaces offer a promising route for producing omniphobic and anti-icing surfaces. Typically, these surfaces are made as a coating with expensive and time consuming assembly methods or with fluorinated films and oils. We report on a route for producing liquid-infused surfaces, which utilizes a liquid precursor fed oxygen-hydrogen flame to produce titania nanoparticles deposited directly on a low-density polyethylene film. This porous nanocoating, with thickness of several hundreds of nanometers, is then filled with silicone oil. The produced surfaces are shown to exhibit excellent anti-icing properties, with an ice adhesion strength of ∼12 kPa, which is an order of magnitude improvement when compared to the plain polyethylene film. The surface was also capable of maintaining this property even after cyclic icing testing.
    Slippery, liquid-infused porous surfaces (SLIPSs) are nature inspired surfaces that are designed to repel liquid and solid materials. These surfaces have been shown to pose anti-icing properties, which broadens the available end-uses from the chemical industry to arctic transportation and energy production. The method behind repellency of SLIPSs relies on preventing outside liquids from penetrating the surface structure to the Wenzel state. Instead, the slippery liquid within the porous solid supports the Cassie-Baxter state (instead of air, here the porous structure is filled with lubricant), where the reduced area of the porous solid surface is available to interact with the liquid or ice to be repelled. The difference between Wenzel and Cassie-Baxter states is illustrated in Figure 1. This phenomenon is exploited in many superhydrophobic surfaces where an air cushion is entrapped within the porous solid surface. As a result, spherical water drops easily roll off the surface (and have static contact angles larger than 150°).
    AlkuperäiskieliEnglanti
    Artikkeli161603
    Sivumäärä4
    JulkaisuApplied Physics Letters
    Vuosikerta110
    Numero16
    Varhainen verkossa julkaisun päivämäärähuhtik. 2017
    DOI - pysyväislinkit
    TilaJulkaistu - 2017
    OKM-julkaisutyyppiA1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

    Julkaisufoorumi-taso

    • Jufo-taso 2

    Sormenjälki

    Sukella tutkimusaiheisiin 'Achieving a slippery, liquid-infused porous surface with anti-icing properties by direct deposition of flame synthesized aerosol nanoparticles on a thermally fragile substrate'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

    Siteeraa tätä