Ambient energy harvesting from a two-way talk radio for flexible wearable devices utilizing inkjet printing masking

Jo Bito; Jimmy G. Hester; Manos M. Tentzeris

doi:10.1109/MWSYM.2015.7167079

Ambient energy harvesting from a two-way talk radio for flexible wearable devices utilizing inkjet printing masking

Jo Bito, Jimmy G. Hester, Manos M. Tentzeris

Tutkimustuotos: Konferenssiartikkeli › Tieteellinen › vertaisarvioitu

7 Sitaatiot (Scopus)

Abstrakti

In this paper, the design, on a flexible LCP substrate, and fabrication process of a wearable circuit harvesting the ambient energy emitted from a two-way radio is discussed in detail.The circuit is fabricated through the combination of circuit traces made with masking utilizing inkjet printing technology and lumped circuit components. The input power for the RF-DC conversion circuit is analytically computed from the measured S-parameters of the Tx-Rx propagation channel. A maximum output power of 43.2mW with the RF-DC conversion efficiency of 82.5% and open- circuit voltage of 17.87 V is achieved with an E-field energy harvester placed 7cm away from an off-the-shelf 1W two-way talk radio.

Alkuperäiskieli	Englanti
Otsikko	2015 IEEE MTT-S International Microwave Symposium, IMS 2015
Kustantaja	IEEE
ISBN (elektroninen)	9781479982752
DOI - pysyväislinkit	https://doi.org/10.1109/MWSYM.2015.7167079
Tila	Julkaistu - 24 heinäk. 2015
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisussa
Tapahtuma	IEEE MTT-S International Microwave Symposium, IMS 2015 - Phoenix, Yhdysvallat Kesto: 17 toukok. 2015 → 22 toukok. 2015

Conference

Conference	IEEE MTT-S International Microwave Symposium, IMS 2015
Maa/Alue	Yhdysvallat
Kaupunki	Phoenix
Ajanjakso	17/05/15 → 22/05/15

!!ASJC Scopus subject areas

Computer Networks and Communications
Signal Processing
Electrical and Electronic Engineering

Pääsy asiakirjaan

10.1109/MWSYM.2015.7167079

Muut tiedostot ja linkit

Link to publication in Scopus

Siteeraa tätä

@inproceedings{bb4d06b036c3479292d72438b4c7be6f,

title = "Ambient energy harvesting from a two-way talk radio for flexible wearable devices utilizing inkjet printing masking",

abstract = "In this paper, the design, on a flexible LCP substrate, and fabrication process of a wearable circuit harvesting the ambient energy emitted from a two-way radio is discussed in detail.The circuit is fabricated through the combination of circuit traces made with masking utilizing inkjet printing technology and lumped circuit components. The input power for the RF-DC conversion circuit is analytically computed from the measured S-parameters of the Tx-Rx propagation channel. A maximum output power of 43.2mW with the RF-DC conversion efficiency of 82.5% and open- circuit voltage of 17.87 V is achieved with an E-field energy harvester placed 7cm away from an off-the-shelf 1W two-way talk radio.",

keywords = "Energy harvesting, Flexible, Inkjet printing, Wearable",

author = "Jo Bito and Hester, {Jimmy G.} and Tentzeris, {Manos M.}",

year = "2015",

month = jul,

day = "24",

doi = "10.1109/MWSYM.2015.7167079",

language = "English",

booktitle = "2015 IEEE MTT-S International Microwave Symposium, IMS 2015",

publisher = "IEEE",

address = "United States",

note = "IEEE MTT-S International Microwave Symposium, IMS 2015 ; Conference date: 17-05-2015 Through 22-05-2015",

}

Bito, J, Hester, JG & Tentzeris, MM 2015, Ambient energy harvesting from a two-way talk radio for flexible wearable devices utilizing inkjet printing masking. julkaisussa 2015 IEEE MTT-S International Microwave Symposium, IMS 2015., 7167079, IEEE, IEEE MTT-S International Microwave Symposium, IMS 2015, Phoenix, Yhdysvallat, 17/05/15. https://doi.org/10.1109/MWSYM.2015.7167079

TY - GEN

T1 - Ambient energy harvesting from a two-way talk radio for flexible wearable devices utilizing inkjet printing masking

AU - Bito, Jo

AU - Hester, Jimmy G.

AU - Tentzeris, Manos M.

PY - 2015/7/24

Y1 - 2015/7/24

N2 - In this paper, the design, on a flexible LCP substrate, and fabrication process of a wearable circuit harvesting the ambient energy emitted from a two-way radio is discussed in detail.The circuit is fabricated through the combination of circuit traces made with masking utilizing inkjet printing technology and lumped circuit components. The input power for the RF-DC conversion circuit is analytically computed from the measured S-parameters of the Tx-Rx propagation channel. A maximum output power of 43.2mW with the RF-DC conversion efficiency of 82.5% and open- circuit voltage of 17.87 V is achieved with an E-field energy harvester placed 7cm away from an off-the-shelf 1W two-way talk radio.

AB - In this paper, the design, on a flexible LCP substrate, and fabrication process of a wearable circuit harvesting the ambient energy emitted from a two-way radio is discussed in detail.The circuit is fabricated through the combination of circuit traces made with masking utilizing inkjet printing technology and lumped circuit components. The input power for the RF-DC conversion circuit is analytically computed from the measured S-parameters of the Tx-Rx propagation channel. A maximum output power of 43.2mW with the RF-DC conversion efficiency of 82.5% and open- circuit voltage of 17.87 V is achieved with an E-field energy harvester placed 7cm away from an off-the-shelf 1W two-way talk radio.

KW - Energy harvesting

KW - Flexible

KW - Inkjet printing

KW - Wearable

UR - http://www.scopus.com/inward/record.url?scp=84946084387&partnerID=8YFLogxK

U2 - 10.1109/MWSYM.2015.7167079

DO - 10.1109/MWSYM.2015.7167079

M3 - Conference contribution

AN - SCOPUS:84946084387

BT - 2015 IEEE MTT-S International Microwave Symposium, IMS 2015

PB - IEEE

T2 - IEEE MTT-S International Microwave Symposium, IMS 2015

Y2 - 17 May 2015 through 22 May 2015

ER -

Ambient energy harvesting from a two-way talk radio for flexible wearable devices utilizing inkjet printing masking

Abstrakti

Conference

!!ASJC Scopus subject areas

Pääsy asiakirjaan

Muut tiedostot ja linkit

Sormenjälki

Siteeraa tätä