An insight into the rough surface effect on fretting characteristics of quenched and tempered steel

Amirhossein Zabihi; Janne Juoksukangas; Jouko Hintikka; Mari Honkanen; Antti Mäntylä; Joona Vaara; Tero Frondelius; Minnamari Vippola; Arto Lehtovaara

An insight into the rough surface effect on fretting characteristics of quenched and tempered steel

Amirhossein Zabihi
, Janne Juoksukangas
, Jouko Hintikka
, Mari Honkanen
, Antti Mäntylä
, Joona Vaara
, Tero Frondelius
, Minnamari Vippola
, Arto Lehtovaara

Tutkimustuotos: Muu konferenssimateriaali › Abstrakti › Tieteellinen

Abstrakti

The effect of the rough surface texture and its orientation on the fretting behavior of 34CrNiMo6 steel was investigated via an annular flat-on-flat contact configuration. A lower friction peak in the running-in phase and approximately the same coefficient of friction value in the steady-state one were observed for the rough surfaces than for the smooth ones under gross sliding conditions. However, in the stable friction tests, roughly the same threshold levels were attained for both rough and smooth contacts.

Keywords: Fretting, Rough Surfaces, Friction, Material Characterization

Alkuperäiskieli	Englanti
Tila	Julkaistu - 2022
OKM-julkaisutyyppi	Ei OKM-tyyppiä
Tapahtuma	7th World Tribology Congress, WTC 2022 - Lyon, Ranska Kesto: 10 heinäk. 2022 → 15 heinäk. 2022 https://www.wtc-2022.org/#:~:text=The%207th%20World%20Tribology,2022%20a%20landmark%20Tribology%20Congress.&text=A%20new%20page%20is%20now,7th%20World%20Tribology%20Congress.

Conference

Conference	7th World Tribology Congress, WTC 2022
Maa/Alue	Ranska
Kaupunki	Lyon
Ajanjakso	10/07/22 → 15/07/22
www-osoite	https://www.wtc-2022.org/#:~:text=The%207th%20World%20Tribology,2022%20a%20landmark%20Tribology%20Congress.&text=A%20new%20page%20is%20now,7th%20World%20Tribology%20Congress.

Tampereen Mikroskopiakeskus
Vippola, M. (Manager), Honkanen, M. (Operator) & Salminen, T. (Operator)
Tekniikan ja luonnontieteiden tiedekunta
Laitteistot/tilat: Tutkimusinfrastruktuuri

Siteeraa tätä

@conference{638b4c71d84c4f0cb8d93b44cc19dbd2,

title = "An insight into the rough surface effect on fretting characteristics of quenched and tempered steel",

abstract = "The effect of the rough surface texture and its orientation on the fretting behavior of 34CrNiMo6 steel was investigated via an annular flat-on-flat contact configuration. A lower friction peak in the running-in phase and approximately the same coefficient of friction value in the steady-state one were observed for the rough surfaces than for the smooth ones under gross sliding conditions. However, in the stable friction tests, roughly the same threshold levels were attained for both rough and smooth contacts. Keywords: Fretting, Rough Surfaces, Friction, Material Characterization ",

author = "Amirhossein Zabihi and Janne Juoksukangas and Jouko Hintikka and Mari Honkanen and Antti M{\"a}ntyl{\"a} and Joona Vaara and Tero Frondelius and Minnamari Vippola and Arto Lehtovaara",

year = "2022",

language = "English",

note = "7th World Tribology Congress, WTC 2022 ; Conference date: 10-07-2022 Through 15-07-2022",

url = "https://www.wtc-2022.org/\#:\textasciitilde{}:text=The\%207th\%20World\%20Tribology,2022\%20a\%20landmark\%20Tribology\%20Congress.\&text=A\%20new\%20page\%20is\%20now,7th\%20World\%20Tribology\%20Congress.",

}

TY - CONF

T1 - An insight into the rough surface effect on fretting characteristics of quenched and tempered steel

AU - Zabihi, Amirhossein

AU - Juoksukangas, Janne

AU - Hintikka, Jouko

AU - Honkanen, Mari

AU - Mäntylä, Antti

AU - Vaara, Joona

AU - Frondelius, Tero

AU - Vippola, Minnamari

AU - Lehtovaara, Arto

PY - 2022

Y1 - 2022

N2 - The effect of the rough surface texture and its orientation on the fretting behavior of 34CrNiMo6 steel was investigated via an annular flat-on-flat contact configuration. A lower friction peak in the running-in phase and approximately the same coefficient of friction value in the steady-state one were observed for the rough surfaces than for the smooth ones under gross sliding conditions. However, in the stable friction tests, roughly the same threshold levels were attained for both rough and smooth contacts. Keywords: Fretting, Rough Surfaces, Friction, Material Characterization

AB - The effect of the rough surface texture and its orientation on the fretting behavior of 34CrNiMo6 steel was investigated via an annular flat-on-flat contact configuration. A lower friction peak in the running-in phase and approximately the same coefficient of friction value in the steady-state one were observed for the rough surfaces than for the smooth ones under gross sliding conditions. However, in the stable friction tests, roughly the same threshold levels were attained for both rough and smooth contacts. Keywords: Fretting, Rough Surfaces, Friction, Material Characterization

M3 - Abstract

T2 - 7th World Tribology Congress, WTC 2022

Y2 - 10 July 2022 through 15 July 2022

ER -

An insight into the rough surface effect on fretting characteristics of quenched and tempered steel

Abstrakti

Conference

Sormenjälki

Laitteet

Tampereen Mikroskopiakeskus

Siteeraa tätä