Anisotropic hysteresis representation of steel sheets based on a vectorization technique applied to Jiles-Atherton model

F. Martin, R. Chen, J. Taurines, A. Belahcen

Tutkimustuotos: ArtikkeliScientificvertaisarvioitu

Abstrakti

Hysteresis model of soft magnetic material enables an accurate estimation of the losses in electrical application. In rotating machine, the flux distribution can magnetized many directions of the iron core. The combination of the rotational and the alternating flux density appears between the slot and the yoke region. Even if the alternating flux density appears in the middle of each tooth, the magnetic properties varies with the magnetized direction with respect to the rolling direction. Whereas the losses strictly increases with the amplitude of an alternating flux density, the hysteresis loss presents a maximum under rotational flux density condition. Although this phenomenon is properly described by the coherent rotation of the domains at the microscopic scale, the macroscopic representation of the material should represent this specific feature. In this paper, a general vectorization technique is applied to the Jiles-Atherton model of hysteresis. The anisotropic anhysteresis behavior is derived from the analysis of a cubic crystal. This anhysteresis model drives the coherent rotation of the hysteresis model. Even if the model parameters are identified with alternating flux condition, the rotational flux density can be predicted properly.
AlkuperäiskieliEnglanti
Artikkeli7300504
Sivumäärä4
JulkaisuIEEE Transactions on Magnetics
Vuosikerta60
Numero3
Varhainen verkossa julkaisun päivämäärä2023
DOI - pysyväislinkit
TilaJulkaistu - 2024
OKM-julkaisutyyppiA1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Julkaisufoorumi-taso

  • Jufo-taso 2

Sormenjälki

Sukella tutkimusaiheisiin 'Anisotropic hysteresis representation of steel sheets based on a vectorization technique applied to Jiles-Atherton model'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

Siteeraa tätä