This paper introduces ClothFace, a shirtsleeve-integrated human-technology interface platform, which comprises two wrist antennas and three radio frequency identification (RFID) integrated circuits (ICs), each with a unique ID. The platform prototype, which is created on a shirtsleeve by cutting the antennas and antenna-IC interconnections from copper tape, can be used for push button and swipe controlling. Each IC can be activated, i.e., electrically connected to the two antennas, by touching the IC. These ICs can act as wireless input buttons to the technology around us. Due to the used passive ultrahigh-frequency (UHF) RFID technology, there is no need for clothing-integrated energy sources, but the interface platform gets all the needed energy from an external RFID reader. The platform prototype was found to be readable with an external RFID reader from all directions at distances of 70-80 cm. Further, seven people giving altogether 1400 inputs tested the prototype sleeves on a table and on body. In these first tests, 96-100% (table) and 92-100% (on-body) success rates were achieved in a gamelike testing setup. Further, the platform was proved to be readable with an off-the-shelf handheld RFID reader from a distance of 40 cm. Based on these initial results, this implementation holds the potential to be used as a touch interface blended into daily clothing, as well as a modular touch-based interaction platform that can be integrated into the surfaces of electronic devices, such as home appliances.
|Julkaisu||Advances in Human-Computer Interaction|
|DOI - pysyväislinkit|
|Tila||Julkaistu - 2020|
|OKM-julkaisutyyppi||A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä|
- Jufo-taso 1
!!ASJC Scopus subject areas
- Human-Computer Interaction