Compressive strength of core specimens drilled from concrete test cylinders

Tutkimustuotos: ArtikkeliScientificvertaisarvioitu

1 Sitaatiot (Scopus)
17 Lataukset (Pure)

Abstrakti

The compressive strength of concrete is highly influenced by the properties oftest specimens, such as size and moisture content. This paper presents theresults of compression tests on more than 650 test specimens made with fourdifferent concrete types, which are mainly air-entrained. The differences incompressive strength between different types of concrete specimens wereinvestigated with similar compaction and curing conditions. The tested speci-mens were 50×50 mm, 80×80 mm, 100×100 mm, and 150×300 mm cores,which were drilled from the cast cylinders. In addition, 150-mm cubes,100×100 mm and 150×300 mm cylinders were included in the test pro-gramme. The ratios of compressive strength between different core sizes andcore strength comparability to the cast specimens were found to be stronglydependent on the concrete type. Drilling was found to have a clear weakeningeffect on obtained compressive strength. The conversion factors for the com-pressive strength between the core and the same size cast specimen was pro-posed for 150×300 mm and 100×100 mm specimen sizes.
AlkuperäiskieliEnglanti
SivutE683-E695
Sivumäärä13
JulkaisuSTRUCTURAL CONCRETE
Vuosikerta22
NumeroS1
Varhainen verkossa julkaisun päivämäärälokak. 2020
DOI - pysyväislinkit
TilaJulkaistu - 25 helmik. 2021
OKM-julkaisutyyppiA1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Julkaisufoorumi-taso

  • Jufo-taso 1

!!ASJC Scopus subject areas

  • Building and Construction
  • Civil and Structural Engineering

Sormenjälki

Sukella tutkimusaiheisiin 'Compressive strength of core specimens drilled from concrete test cylinders'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

Siteeraa tätä