Experimental and numerical investigation of fretting fatigue behavior in bolted joints

Janne Juoksukangas; Arto Lehtovaara; Antti Mäntylä

doi:10.1016/j.triboint.2016.07.021

Experimental and numerical investigation of fretting fatigue behavior in bolted joints

Janne Juoksukangas, Arto Lehtovaara, Antti Mäntylä

Tutkimustuotos: Artikkeli › Tieteellinen › vertaisarvioitu

77 Sitaatiot (Scopus)

Abstrakti

Bolted joints may suffer from fretting damage which can significantly decrease fatigue life. A testing arrangement was developed to study the effect of different operating and design parameters of a single bolted joint on fretting fatigue life. Fretting fatigue stress-life (S-N) tests were conducted to investigate in particular the effect of bolt preload and cyclic bulk loading on fatigue life. Fretting fatigue life decreased when increasing the preload and also when increasing the bulk stress. The Digital Image Correlation method was applied to measure tangential displacements close to the contact. A corresponding finite element model of the test setup was used to analyze contact variables in greater detail. The numerical results corresponded well to the experimental results.

Alkuperäiskieli	Englanti
Sivut	440-448
Sivumäärä	9
Julkaisu	Tribology International
Vuosikerta	103
DOI - pysyväislinkit	https://doi.org/10.1016/j.triboint.2016.07.021
Tila	Julkaistu - 1 marrask. 2016
OKM-julkaisutyyppi	A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Julkaisufoorumi-taso

Jufo-taso 2

!!ASJC Scopus subject areas

Mechanics of Materials
Mechanical Engineering
Surfaces and Interfaces
Surfaces, Coatings and Films

Pääsy asiakirjaan

10.1016/j.triboint.2016.07.021

Siteeraa tätä

@article{dedeeb3831a54a9a88a365fa08860050,

title = "Experimental and numerical investigation of fretting fatigue behavior in bolted joints",

abstract = "Bolted joints may suffer from fretting damage which can significantly decrease fatigue life. A testing arrangement was developed to study the effect of different operating and design parameters of a single bolted joint on fretting fatigue life. Fretting fatigue stress-life (S-N) tests were conducted to investigate in particular the effect of bolt preload and cyclic bulk loading on fatigue life. Fretting fatigue life decreased when increasing the preload and also when increasing the bulk stress. The Digital Image Correlation method was applied to measure tangential displacements close to the contact. A corresponding finite element model of the test setup was used to analyze contact variables in greater detail. The numerical results corresponded well to the experimental results.",

keywords = "Contact, Fatigue, Finite-element method, Fretting",

author = "Janne Juoksukangas and Arto Lehtovaara and Antti M{\"a}ntyl{\"a}",

note = "INT=MOL, {"}Juoksukangas, Janne{"}",

year = "2016",

month = nov,

day = "1",

doi = "10.1016/j.triboint.2016.07.021",

language = "English",

volume = "103",

pages = "440--448",

journal = "Tribology International",

issn = "0301-679X",

publisher = "Elsevier Inc.",

}

TY - JOUR

T1 - Experimental and numerical investigation of fretting fatigue behavior in bolted joints

AU - Juoksukangas, Janne

AU - Lehtovaara, Arto

AU - Mäntylä, Antti

N1 - INT=MOL, "Juoksukangas, Janne"

PY - 2016/11/1

Y1 - 2016/11/1

N2 - Bolted joints may suffer from fretting damage which can significantly decrease fatigue life. A testing arrangement was developed to study the effect of different operating and design parameters of a single bolted joint on fretting fatigue life. Fretting fatigue stress-life (S-N) tests were conducted to investigate in particular the effect of bolt preload and cyclic bulk loading on fatigue life. Fretting fatigue life decreased when increasing the preload and also when increasing the bulk stress. The Digital Image Correlation method was applied to measure tangential displacements close to the contact. A corresponding finite element model of the test setup was used to analyze contact variables in greater detail. The numerical results corresponded well to the experimental results.

AB - Bolted joints may suffer from fretting damage which can significantly decrease fatigue life. A testing arrangement was developed to study the effect of different operating and design parameters of a single bolted joint on fretting fatigue life. Fretting fatigue stress-life (S-N) tests were conducted to investigate in particular the effect of bolt preload and cyclic bulk loading on fatigue life. Fretting fatigue life decreased when increasing the preload and also when increasing the bulk stress. The Digital Image Correlation method was applied to measure tangential displacements close to the contact. A corresponding finite element model of the test setup was used to analyze contact variables in greater detail. The numerical results corresponded well to the experimental results.

KW - Contact

KW - Fatigue

KW - Finite-element method

KW - Fretting

U2 - 10.1016/j.triboint.2016.07.021

DO - 10.1016/j.triboint.2016.07.021

M3 - Article

AN - SCOPUS:84981164556

SN - 0301-679X

VL - 103

SP - 440

EP - 448

JO - Tribology International

JF - Tribology International

ER -

Experimental and numerical investigation of fretting fatigue behavior in bolted joints

Abstrakti

Julkaisufoorumi-taso

!!ASJC Scopus subject areas

Pääsy asiakirjaan

Sormenjälki

Siteeraa tätä