Experimental Study on Brush-Painted Metallic Nanoparticle UHF RFID Tags on Wood Substrates

Erja Sipilä; Johanna Virkki; Lauri Sydänheimo; Leena Ukkonen

doi:10.1109/LAWP.2014.2362966

Experimental Study on Brush-Painted Metallic Nanoparticle UHF RFID Tags on Wood Substrates

Julkaisun otsikon käännös: Experimental Study on Brush-Painted Metallic Nanoparticle UHF RFID Tags on Wood Substrates

Erja Sipilä, Johanna Virkki, Lauri Sydänheimo, Leena Ukkonen

Tutkimustuotos: Artikkeli › Scientific › vertaisarvioitu

10 Sitaatiot (Scopus)

Abstrakti

Due to an increasing interest to add functionality in various products, versatile electronics manufacturing methods are needed for numerous applications. In this letter, ultra-high-frequency (UHF) radio frequency identification (RFID) tag antennas manufactured by brush-painting directly on wood veneer substrate were examined. Silver and copper nanoparticle inks were used in antenna manufacturing. According to our measurements, brush-painted silver and copper nanoparticle UHF RFID tags showed read ranges of 5 and 3 m, respectively, even when embedded inside wood layers. These read ranges are sufficient for many applications, e.g., in construction and packaging industry, where wood is a common material. The novel manufacturing process, its applications, and the achieved tag performance results are presented in this letter.

Julkaisun otsikon käännös	Experimental Study on Brush-Painted Metallic Nanoparticle UHF RFID Tags on Wood Substrates
Alkuperäiskieli	Englanti
Sivut	301-304
Sivumäärä	4
Julkaisu	IEEE Antennas and Wireless Propagation Letters
Vuosikerta	14
DOI - pysyväislinkit	https://doi.org/10.1109/LAWP.2014.2362966
Tila	Julkaistu - 2014
OKM-julkaisutyyppi	A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Julkaisufoorumi-taso

Jufo-taso 2

Pääsy asiakirjaan

10.1109/LAWP.2014.2362966

Siteeraa tätä

@article{4db9344263594f26a816e048d5986a98,

title = "Experimental Study on Brush-Painted Metallic Nanoparticle UHF RFID Tags on Wood Substrates",

abstract = "Due to an increasing interest to add functionality in various products, versatile electronics manufacturing methods are needed for numerous applications. In this letter, ultra-high-frequency (UHF) radio frequency identification (RFID) tag antennas manufactured by brush-painting directly on wood veneer substrate were examined. Silver and copper nanoparticle inks were used in antenna manufacturing. According to our measurements, brush-painted silver and copper nanoparticle UHF RFID tags showed read ranges of 5 and 3 m, respectively, even when embedded inside wood layers. These read ranges are sufficient for many applications, e.g., in construction and packaging industry, where wood is a common material. The novel manufacturing process, its applications, and the achieved tag performance results are presented in this letter.",

author = "Erja Sipil{\"a} and Johanna Virkki and Lauri Syd{\"a}nheimo and Leena Ukkonen",

note = "Contribution: organisation=elt,FACT1=1<br/>Portfolio EDEND: 2014-10-30<br/>Publisher name: Institute of Electrical and Electronics Engineers IEEE",

year = "2014",

doi = "10.1109/LAWP.2014.2362966",

language = "English",

volume = "14",

pages = "301--304",

journal = "IEEE Antennas and Wireless Propagation Letters",

issn = "1536-1225",

publisher = "Institute of Electrical and Electronics Engineers",

}

TY - JOUR

T1 - Experimental Study on Brush-Painted Metallic Nanoparticle UHF RFID Tags on Wood Substrates

AU - Sipilä, Erja

AU - Virkki, Johanna

AU - Sydänheimo, Lauri

AU - Ukkonen, Leena

N1 - Contribution: organisation=elt,FACT1=1<br/>Portfolio EDEND: 2014-10-30<br/>Publisher name: Institute of Electrical and Electronics Engineers IEEE

PY - 2014

Y1 - 2014

N2 - Due to an increasing interest to add functionality in various products, versatile electronics manufacturing methods are needed for numerous applications. In this letter, ultra-high-frequency (UHF) radio frequency identification (RFID) tag antennas manufactured by brush-painting directly on wood veneer substrate were examined. Silver and copper nanoparticle inks were used in antenna manufacturing. According to our measurements, brush-painted silver and copper nanoparticle UHF RFID tags showed read ranges of 5 and 3 m, respectively, even when embedded inside wood layers. These read ranges are sufficient for many applications, e.g., in construction and packaging industry, where wood is a common material. The novel manufacturing process, its applications, and the achieved tag performance results are presented in this letter.

AB - Due to an increasing interest to add functionality in various products, versatile electronics manufacturing methods are needed for numerous applications. In this letter, ultra-high-frequency (UHF) radio frequency identification (RFID) tag antennas manufactured by brush-painting directly on wood veneer substrate were examined. Silver and copper nanoparticle inks were used in antenna manufacturing. According to our measurements, brush-painted silver and copper nanoparticle UHF RFID tags showed read ranges of 5 and 3 m, respectively, even when embedded inside wood layers. These read ranges are sufficient for many applications, e.g., in construction and packaging industry, where wood is a common material. The novel manufacturing process, its applications, and the achieved tag performance results are presented in this letter.

U2 - 10.1109/LAWP.2014.2362966

DO - 10.1109/LAWP.2014.2362966

M3 - Article

SN - 1536-1225

VL - 14

SP - 301

EP - 304

JO - IEEE Antennas and Wireless Propagation Letters

JF - IEEE Antennas and Wireless Propagation Letters

ER -

Experimental Study on Brush-Painted Metallic Nanoparticle UHF RFID Tags on Wood Substrates

Abstrakti

Julkaisufoorumi-taso

Pääsy asiakirjaan

Sormenjälki

Siteeraa tätä