Flexible and stretchable 3D printed passive UHF RFID tag

Muhammad Rizwan, Waqas Khan, Han He, Johanna Virkki, Lauri Sydänheimo, Leena Ukkonen

    Tutkimustuotos: KirjeScientificvertaisarvioitu

    27 Sitaatiot (Scopus)

    Abstrakti

    The letter presents the fabrication and analysis of a flexible and stretchable 3D printed passive ultra-high frequency (UHF) radio-frequency identification (RFID) tag. The tag is fabricated on a flexible 3D printed Ninjaflex substrate and the conductive part of the tag consists of stretchable silver conductive paste dispensed with direct write method. The letter outlines the details of the 3D printing of the substrate, the characterisation of the substrate material at the UHF band, the direct write dispensing of the tag antenna, and the simulation and wireless measurement results of the fabricated tag. Moreover, to verify the flexibility and stretchability of the tag, strain reliability results of the tag are presented. Measurement results show that initially the manufactured tag achieves a 10.6 m read range. After 100 times of harsh stretching, the read range is still 7.4 m. Overall, the performance of the tag is robust and concludes that the fabrication methodology can be used in the manufacturing of RFID tags for future identification and sensing applications.
    AlkuperäiskieliEnglanti
    Sivut1054-1056
    JulkaisuElectronics Letters
    Vuosikerta53
    Numero15
    Varhainen verkossa julkaisun päivämäärä12 kesäk. 2017
    DOI - pysyväislinkit
    TilaJulkaistu - 20 heinäk. 2017
    OKM-julkaisutyyppiA1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

    Julkaisufoorumi-taso

    • Jufo-taso 1

    Sormenjälki

    Sukella tutkimusaiheisiin 'Flexible and stretchable 3D printed passive UHF RFID tag'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

    Siteeraa tätä