Hot Gas Desulfurization with Zinc Titanate Sorbents in a Fluidized Bed: 1. Determination of Sorbent Particle Conversion Rate Model Parameters

JT Konttinen, CAP Zevenhoven, MM Hupa

Tutkimustuotos: ArtikkeliTieteellinenvertaisarvioitu

24 Sitaatiot (Scopus)

Abstrakti

Regenerable mixed metal oxide sorbents are the prime candidates for the removal of hydrogen sulfide (the main pollutant) from the hot coal gas in the simplified integrated gasification combined cycle (IGCC) processes. As part of the sulfur removal process development, Carbona Corp. is developing fluidized bed reactor models for scale-up. It is essential for this work to apply a reliable and simple correlation for the conversion rate of zinc titanate or hydrogen sulfide in the sulfidation reaction. Two different models, the unreacted shrinking core (USC) model and overlapping grain (OG) model, are applied to this purpose. The parameter values obtained from ambient pressure tests are compared with those reported earlier for zinc titanates. Potential reasons for the differences are discussed. In the modeling of high-pressure sulfidation data, reaction rate constants from the literature are used, thus leaving the product layer diffusion coefficient as a fitting parameter. The values obtained indicate a linear dependence on process pressure.

AlkuperäiskieliEnglanti
Sivut2332-2339
Sivumäärä8
JulkaisuIndustrial & Engineering Chemistry Research
Vuosikerta36
Numero6
DOI - pysyväislinkit
TilaJulkaistu - kesäk. 1997
Julkaistu ulkoisestiKyllä
OKM-julkaisutyyppiA1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Sormenjälki

Sukella tutkimusaiheisiin 'Hot Gas Desulfurization with Zinc Titanate Sorbents in a Fluidized Bed: 1. Determination of Sorbent Particle Conversion Rate Model Parameters'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

Siteeraa tätä