Identification and compensation of error sources in the microbond test utilising a reliable high-throughput device

P. Laurikainen; M. Kakkonen; M. von Essen; O. Tanhuanpää; P. Kallio; E. Sarlin

doi:10.1016/j.compositesa.2020.105988

Identification and compensation of error sources in the microbond test utilising a reliable high-throughput device

P. Laurikainen, M. Kakkonen, M. von Essen, O. Tanhuanpää, P. Kallio, E. Sarlin

Materiaalitiede ja ympäristötekniikka

Tutkimustuotos: Artikkeli › Tieteellinen › vertaisarvioitu

22 Sitaatiot (Scopus)

58 Lataukset (Pure)

Abstrakti

This paper addresses the issue of high scatter in microbond test results. Implementation of the test is discussed and the reliability of a state-of-the-art test system is analysed through characterisation of the critical components of the device. In total 50 filaments and around 30 droplets from each filament are measured. The results verify that much of the commonly observed scattering originates from real variation between the filaments and heterogeneous interfacial properties, while the error from the experimentation is comparably small. A stress based analytical model was noted to agree well with the experimental results.

Alkuperäiskieli	Englanti
Artikkeli	105988
Julkaisu	Composites Part A: Applied Science and Manufacturing
Vuosikerta	137
Varhainen verkossa julkaisun päivämäärä	kesäk. 2020
DOI - pysyväislinkit	https://doi.org/10.1016/j.compositesa.2020.105988
Tila	Julkaistu - lokak. 2020
OKM-julkaisutyyppi	A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Rahoitus

The study was partly financially supported by the Tampere University Graduate School as well as the Academy of Finland project “From micro-scale data to macro-scale understanding for improved safety of composite materials” (314983).

Julkaisufoorumi-taso

Jufo-taso 2

!!ASJC Scopus subject areas

Ceramics and Composites
Mechanics of Materials

Pääsy asiakirjaan

10.1016/j.compositesa.2020.105988Lisenssi: CC BY-NC-ND

1-s2.0-S1359835X2030227X-mainFinal published version, 970 KBLisenssi: CC BY-NC-ND

http://urn.fi/URN:NBN:fi:tuni-202007066338Lisenssi: CC BY-NC-ND

Siteeraa tätä

@article{7debac64f3d24b899abd82183adb52c8,

title = "Identification and compensation of error sources in the microbond test utilising a reliable high-throughput device",

abstract = "This paper addresses the issue of high scatter in microbond test results. Implementation of the test is discussed and the reliability of a state-of-the-art test system is analysed through characterisation of the critical components of the device. In total 50 filaments and around 30 droplets from each filament are measured. The results verify that much of the commonly observed scattering originates from real variation between the filaments and heterogeneous interfacial properties, while the error from the experimentation is comparably small. A stress based analytical model was noted to agree well with the experimental results.",

keywords = "Fibre/matrix bond, Interface/interphase, Microbond test, Polymer-matrix composites (PMCs)",

author = "P. Laurikainen and M. Kakkonen and {von Essen}, M. and O. Tanhuanp{\"a}{\"a} and P. Kallio and E. Sarlin",

note = "EXT={"}von Essen, M.{"} EXT={"}Tanhuanp{\"a}{\"a}, O.{"}",

year = "2020",

month = oct,

doi = "10.1016/j.compositesa.2020.105988",

language = "English",

volume = "137",

journal = "Composites Part A: Applied Science and Manufacturing",

issn = "1359-835X",

publisher = "Elsevier Ltd.",

}

TY - JOUR

T1 - Identification and compensation of error sources in the microbond test utilising a reliable high-throughput device

AU - Laurikainen, P.

AU - Kakkonen, M.

AU - von Essen, M.

AU - Tanhuanpää, O.

AU - Kallio, P.

AU - Sarlin, E.

N1 - EXT="von Essen, M." EXT="Tanhuanpää, O."

PY - 2020/10

Y1 - 2020/10

N2 - This paper addresses the issue of high scatter in microbond test results. Implementation of the test is discussed and the reliability of a state-of-the-art test system is analysed through characterisation of the critical components of the device. In total 50 filaments and around 30 droplets from each filament are measured. The results verify that much of the commonly observed scattering originates from real variation between the filaments and heterogeneous interfacial properties, while the error from the experimentation is comparably small. A stress based analytical model was noted to agree well with the experimental results.

AB - This paper addresses the issue of high scatter in microbond test results. Implementation of the test is discussed and the reliability of a state-of-the-art test system is analysed through characterisation of the critical components of the device. In total 50 filaments and around 30 droplets from each filament are measured. The results verify that much of the commonly observed scattering originates from real variation between the filaments and heterogeneous interfacial properties, while the error from the experimentation is comparably small. A stress based analytical model was noted to agree well with the experimental results.

KW - Fibre/matrix bond

KW - Interface/interphase

KW - Microbond test

KW - Polymer-matrix composites (PMCs)

U2 - 10.1016/j.compositesa.2020.105988

DO - 10.1016/j.compositesa.2020.105988

M3 - Article

AN - SCOPUS:85086573840

SN - 1359-835X

VL - 137

JO - Composites Part A: Applied Science and Manufacturing

JF - Composites Part A: Applied Science and Manufacturing

M1 - 105988

ER -

Identification and compensation of error sources in the microbond test utilising a reliable high-throughput device

Abstrakti

Rahoitus

Julkaisufoorumi-taso

!!ASJC Scopus subject areas

Pääsy asiakirjaan

Sormenjälki

Siteeraa tätä