Intelligent Wristbands: Fabrication of Wearable RFID Solutions by 3D Printing Pen

Adnan Mehmood; Xiaochen Chen; Han He; Shubin Ma; Leena Ukkonen; Johanna Virkki

doi:10.1109/IEEECONF35879.2020.9329572

Intelligent Wristbands: Fabrication of Wearable RFID Solutions by 3D Printing Pen

Adnan Mehmood, Xiaochen Chen, Han He, Shubin Ma, Leena Ukkonen, Johanna Virkki

BioMediTech

Tutkimustuotos: Konferenssiartikkeli › Scientific › vertaisarvioitu

4 Lataukset (Pure)

Abstrakti

We present RFID (radio frequency identification)-based passive UHF (ultra-high frequency) wristbands fabricated with a 3D printing pen. The used 3D printing material is flexible and biodegradable, and thus suitable for fabrication of such inexpensive and widely useful wearable wireless platforms. The tag antenna (that is fabricated from conductive thread) and the RFID IC (integrated circuit) are embedded into the platform by using 3D-printed fasteners. This paper presents the wristband fabrication, ensures their reliability, and carries out practical testing in normal use environments. Based on the achieved results, the studied combination of conductive thread and 3D printing pen is a suitable fabrication solution for intelligent wearable platforms. The fabricated wristbands show high moisture reliability and excellent wireless performance in practical testing situations.

Alkuperäiskieli	Englanti
Otsikko	2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting
Alaotsikko	IEEECONF 2020 - Proceedings
Kustantaja	IEEE
Sivut	1319-1320
Sivumäärä	2
ISBN (elektroninen)	978-1-7281-6670-4
ISBN (painettu)	978-1-7281-6671-1
DOI - pysyväislinkit	https://doi.org/10.1109/IEEECONF35879.2020.9329572
Tila	Julkaistu - 2020
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisussa
Tapahtuma	IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting - Virtually, Toronto, Kanada Kesto: 5 heinäk. 2020 → 10 heinäk. 2020

Julkaisusarja

Nimi	IEEE International Symposium on Antennas and Propagation
Vuosikerta	2020
ISSN (painettu)	1522-3965
ISSN (elektroninen)	1947-1491

Conference

Conference	IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting
Maa/Alue	Kanada
Kaupunki	Toronto
Ajanjakso	5/07/20 → 10/07/20

Julkaisufoorumi-taso

Jufo-taso 1

!!ASJC Scopus subject areas

Computer Networks and Communications
Instrumentation

Pääsy asiakirjaan

10.1109/IEEECONF35879.2020.9329572

Intelligent Wristbands – Fabrication of Wearable
This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Accepted author manuscript, 284 KB

http://urn.fi/URN:NBN:fi:tuni-202103252675

Siteeraa tätä

Mehmood, A., Chen, X., He, H., Ma, S., Ukkonen, L., & Virkki, J. (2020). Intelligent Wristbands: Fabrication of Wearable RFID Solutions by 3D Printing Pen. teoksessa 2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting : IEEECONF 2020 - Proceedings (Sivut 1319-1320). [9329572] (IEEE International Symposium on Antennas and Propagation; Vuosikerta 2020). IEEE. https://doi.org/10.1109/IEEECONF35879.2020.9329572

@inproceedings{ebee17e3f8e74a54b6a747c1a744ef69,

title = "Intelligent Wristbands: Fabrication of Wearable RFID Solutions by 3D Printing Pen",

abstract = "We present RFID (radio frequency identification)-based passive UHF (ultra-high frequency) wristbands fabricated with a 3D printing pen. The used 3D printing material is flexible and biodegradable, and thus suitable for fabrication of such inexpensive and widely useful wearable wireless platforms. The tag antenna (that is fabricated from conductive thread) and the RFID IC (integrated circuit) are embedded into the platform by using 3D-printed fasteners. This paper presents the wristband fabrication, ensures their reliability, and carries out practical testing in normal use environments. Based on the achieved results, the studied combination of conductive thread and 3D printing pen is a suitable fabrication solution for intelligent wearable platforms. The fabricated wristbands show high moisture reliability and excellent wireless performance in practical testing situations.",

keywords = "3D printing pen, Eco-friendliness, flexible electronics, passive UHF RFID, wearable electronics",

author = "Adnan Mehmood and Xiaochen Chen and Han He and Shubin Ma and Leena Ukkonen and Johanna Virkki",

note = "JUFOID=73676 Publisher Copyright: {\textcopyright} 2020 IEEE. Copyright: Copyright 2021 Elsevier B.V., All rights reserved.; IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting ; Conference date: 05-07-2020 Through 10-07-2020",

year = "2020",

doi = "10.1109/IEEECONF35879.2020.9329572",

language = "English",

isbn = "978-1-7281-6671-1",

series = "IEEE International Symposium on Antennas and Propagation",

publisher = "IEEE",

pages = "1319--1320",

booktitle = "2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting",

}

Mehmood, A, Chen, X, He, H, Ma, S, Ukkonen, L & Virkki, J 2020, Intelligent Wristbands: Fabrication of Wearable RFID Solutions by 3D Printing Pen. julkaisussa 2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting : IEEECONF 2020 - Proceedings., 9329572, IEEE International Symposium on Antennas and Propagation, Vuosikerta 2020, IEEE, Sivut 1319-1320, IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, Toronto, Kanada, 5/07/20. https://doi.org/10.1109/IEEECONF35879.2020.9329572

Intelligent Wristbands: Fabrication of Wearable RFID Solutions by 3D Printing Pen. / Mehmood, Adnan; Chen, Xiaochen; He, Han et al.
2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting : IEEECONF 2020 - Proceedings. IEEE, 2020. s. 1319-1320 9329572 (IEEE International Symposium on Antennas and Propagation; Vuosikerta 2020).

Tutkimustuotos: Konferenssiartikkeli › Scientific › vertaisarvioitu

TY - GEN

T1 - Intelligent Wristbands

T2 - IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

AU - Mehmood, Adnan

AU - Chen, Xiaochen

AU - He, Han

AU - Ma, Shubin

AU - Ukkonen, Leena

AU - Virkki, Johanna

PY - 2020

Y1 - 2020

N2 - We present RFID (radio frequency identification)-based passive UHF (ultra-high frequency) wristbands fabricated with a 3D printing pen. The used 3D printing material is flexible and biodegradable, and thus suitable for fabrication of such inexpensive and widely useful wearable wireless platforms. The tag antenna (that is fabricated from conductive thread) and the RFID IC (integrated circuit) are embedded into the platform by using 3D-printed fasteners. This paper presents the wristband fabrication, ensures their reliability, and carries out practical testing in normal use environments. Based on the achieved results, the studied combination of conductive thread and 3D printing pen is a suitable fabrication solution for intelligent wearable platforms. The fabricated wristbands show high moisture reliability and excellent wireless performance in practical testing situations.

AB - We present RFID (radio frequency identification)-based passive UHF (ultra-high frequency) wristbands fabricated with a 3D printing pen. The used 3D printing material is flexible and biodegradable, and thus suitable for fabrication of such inexpensive and widely useful wearable wireless platforms. The tag antenna (that is fabricated from conductive thread) and the RFID IC (integrated circuit) are embedded into the platform by using 3D-printed fasteners. This paper presents the wristband fabrication, ensures their reliability, and carries out practical testing in normal use environments. Based on the achieved results, the studied combination of conductive thread and 3D printing pen is a suitable fabrication solution for intelligent wearable platforms. The fabricated wristbands show high moisture reliability and excellent wireless performance in practical testing situations.

KW - 3D printing pen

KW - Eco-friendliness

KW - flexible electronics

KW - passive UHF RFID

KW - wearable electronics

U2 - 10.1109/IEEECONF35879.2020.9329572

DO - 10.1109/IEEECONF35879.2020.9329572

M3 - Conference contribution

AN - SCOPUS:85101630410

SN - 978-1-7281-6671-1

T3 - IEEE International Symposium on Antennas and Propagation

SP - 1319

EP - 1320

BT - 2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting

PB - IEEE

Y2 - 5 July 2020 through 10 July 2020

ER -

Mehmood A, Chen X, He H, Ma S, Ukkonen L, Virkki J. Intelligent Wristbands: Fabrication of Wearable RFID Solutions by 3D Printing Pen. julkaisussa 2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting : IEEECONF 2020 - Proceedings. IEEE. 2020. s. 1319-1320. 9329572. (IEEE International Symposium on Antennas and Propagation). doi: 10.1109/IEEECONF35879.2020.9329572

Intelligent Wristbands: Fabrication of Wearable RFID Solutions by 3D Printing Pen

Abstrakti

Julkaisusarja

Conference

Julkaisufoorumi-taso

!!ASJC Scopus subject areas

Pääsy asiakirjaan

Sormenjälki

Siteeraa tätä