Model-based Guidance, Navigation and Control architecture for an Autonomous Underwater Vehicle

Jose Villa, Guillem Vallicrosa, Jussi Aaltonen, Pere Ridao, Kari Koskinen

Tutkimustuotos: KonferenssiartikkeliScientificvertaisarvioitu

64 Lataukset (Pure)

Abstrakti

This article studies the design, modeling, and implementation of a model-based Guidance, Navigation, and Control (GNC) architecture for an Autonomous Underwater Vehicle (AUV). First, effective simulation modeling is developed using a theoretical six-degree-of-freedom (6DoF) dynamic model. Then, this study considers two GNC algorithms (simple and advanced). The simple GNC algorithm considers three different kinds of PID controllers (velocity, velocity-position, and position), and the advanced GNC algorithm enables path-following and data acquisition and processing from an underwater sensor. The path following is based on the position control using a unique PID controller and obtains its waypoints from a wall detection algorithm. This wall detection algorithm uses a mechanical imaging sonar as the main perception sensor. Finally, an implementation challenge in two control scenarios is addressed to validate the designed GNC architecture and to carry out model-verification of the position PID controller.
AlkuperäiskieliEnglanti
OtsikkoGlobal Oceans 2020: Singapore – U.S. Gulf Coast
KustantajaIEEE
Sivumäärä6
ISBN (elektroninen)978-1-7281-5446-6
ISBN (painettu)978-1-7281-8409-8
DOI - pysyväislinkit
TilaJulkaistu - 9 huhtik. 2021
OKM-julkaisutyyppiA4 Artikkeli konferenssijulkaisussa
TapahtumaOCEANS -
Kesto: 5 lokak. 202014 lokak. 2020

Conference

ConferenceOCEANS
Ajanjakso5/10/2014/10/20

Julkaisufoorumi-taso

  • Jufo-taso 1

Sormenjälki

Sukella tutkimusaiheisiin 'Model-based Guidance, Navigation and Control architecture for an Autonomous Underwater Vehicle'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

Siteeraa tätä