Nanocellulose films as substrates for printed electronics

Arno Pammo; Hanna Christophliemk; Jari Keskinen; Tomas Björkqvist; Sanna Siljander; Matti Mäntysalo; Sampo Tuukkanen

doi:10.1109/MARSS.2019.8860931

Nanocellulose films as substrates for printed electronics

Arno Pammo
, Hanna Christophliemk
, Jari Keskinen
, Tomas Björkqvist
, Sanna Siljander
, Matti Mäntysalo
, Sampo Tuukkanen

Tutkimustuotos: Konferenssiartikkeli › Tieteellinen › vertaisarvioitu

6 Sitaatiot (Scopus)

78 Lataukset (Pure)

Abstrakti

Microfibrillated cellulose (MFC) was fabricated from cellulose pulp using in-house mechanical fibrillation equipment. Subsequently, freestanding MFC films were fabricated with in-house developed hot-plate drying technique. The MFC films were tested as substrate materials for printed electronics patterns. Conducting patterns were fabricated on the MFC films using screen printing and vacuum evaporation. Electrical conductivity of the fabricated patterns was measured using four-wire technique. It was shown that the MFC films are suitable substrate materials for printing of functional electronic ink patterns, and thermal annealing of the patterns.

Alkuperäiskieli	Englanti
Otsikko	Proceedings MARSS 2019- International Conference on Manipulation Automation and Robotics at Small Scales
Alaotsikko	July 1-5, 2019 Helsinki
Toimittajat	Sinan Haliyo, Albert Sill, Quan Zhou, Pasi Kallio, Sergej Fatikow
Kustantaja	IEEE
Sivut	1-5
Sivumäärä	5
ISBN (elektroninen)	978-1-7281-0948-0
ISBN (painettu)	978-1-7281-0949-7
DOI - pysyväislinkit	https://doi.org/10.1109/MARSS.2019.8860931
Tila	Julkaistu - 15 lokak. 2019
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisussa
Tapahtuma	International Conference on Manipulation, Automation and Robotics at Small Scales - Kesto: 21 elok. 2019 → …

Conference

Conference	International Conference on Manipulation, Automation and Robotics at Small Scales
Ajanjakso	21/08/19 → …

Julkaisufoorumi-taso

Jufo-taso 1

Pääsy asiakirjaan

10.1109/MARSS.2019.8860931

Pammo_et_al_MARSS_2019_postprint
This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Accepted author manuscript, 957 KBLisenssi: Other

http://urn.fi/URN:NBN:fi:tuni-201910284135

Laboratory for Future Electronics – LFE
Mäntysalo, M. (Yhteyshenkilö), Majumdar, S. (Yhteyshenkilö), Berger, P. (Yhteyshenkilö), Lupo, D. (Yhteyshenkilö) & Keskinen, J. (Yhteyshenkilö)
Sähkötekniikka
Laitteistot/tilat: Tutkimusinfrastruktuuri

Siteeraa tätä

Pammo, A., Christophliemk, H., Keskinen, J., Björkqvist, T., Siljander, S., Mäntysalo, M., & Tuukkanen, S. (2019). Nanocellulose films as substrates for printed electronics. teoksessa S. Haliyo, A. Sill, Q. Zhou, P. Kallio, & S. Fatikow (Toimittajat), Proceedings MARSS 2019- International Conference on Manipulation Automation and Robotics at Small Scales: July 1-5, 2019 Helsinki (Sivut 1-5). IEEE. https://doi.org/10.1109/MARSS.2019.8860931

@inproceedings{70c80a16216b4e7fafcfabc1c97181f4,

title = "Nanocellulose films as substrates for printed electronics",

abstract = "Microfibrillated cellulose (MFC) was fabricated from cellulose pulp using in-house mechanical fibrillation equipment. Subsequently, freestanding MFC films were fabricated with in-house developed hot-plate drying technique. The MFC films were tested as substrate materials for printed electronics patterns. Conducting patterns were fabricated on the MFC films using screen printing and vacuum evaporation. Electrical conductivity of the fabricated patterns was measured using four-wire technique. It was shown that the MFC films are suitable substrate materials for printing of functional electronic ink patterns, and thermal annealing of the patterns. ",

author = "Arno Pammo and Hanna Christophliemk and Jari Keskinen and Tomas Bj{\"o}rkqvist and Sanna Siljander and Matti M{\"a}ntysalo and Sampo Tuukkanen",

year = "2019",

month = oct,

day = "15",

doi = "10.1109/MARSS.2019.8860931",

language = "English",

isbn = "978-1-7281-0949-7 ",

pages = "1--5",

editor = "Sinan Haliyo and Albert Sill and Quan Zhou and Pasi Kallio and Sergej Fatikow",

booktitle = "Proceedings MARSS 2019- International Conference on Manipulation Automation and Robotics at Small Scales",

publisher = "IEEE",

address = "United States",

note = "International Conference on Manipulation, Automation and Robotics at Small Scales ; Conference date: 21-08-2019",

}

Pammo, A, Christophliemk, H, Keskinen, J , Björkqvist, T, Siljander, S, Mäntysalo, M & Tuukkanen, S 2019, Nanocellulose films as substrates for printed electronics. julkaisussa S Haliyo, A Sill, Q Zhou, P Kallio & S Fatikow (toim), Proceedings MARSS 2019- International Conference on Manipulation Automation and Robotics at Small Scales: July 1-5, 2019 Helsinki. IEEE, Sivut 1-5, International Conference on Manipulation, Automation and Robotics at Small Scales, 21/08/19. https://doi.org/10.1109/MARSS.2019.8860931

Nanocellulose films as substrates for printed electronics. / Pammo, Arno; Christophliemk, Hanna; Keskinen, Jari et al.
Proceedings MARSS 2019- International Conference on Manipulation Automation and Robotics at Small Scales: July 1-5, 2019 Helsinki. toim. / Sinan Haliyo; Albert Sill; Quan Zhou; Pasi Kallio; Sergej Fatikow. IEEE, 2019. s. 1-5.

Tutkimustuotos: Konferenssiartikkeli › Tieteellinen › vertaisarvioitu

TY - GEN

T1 - Nanocellulose films as substrates for printed electronics

AU - Pammo, Arno

AU - Christophliemk, Hanna

AU - Keskinen, Jari

AU - Björkqvist, Tomas

AU - Siljander, Sanna

AU - Mäntysalo, Matti

AU - Tuukkanen, Sampo

PY - 2019/10/15

Y1 - 2019/10/15

N2 - Microfibrillated cellulose (MFC) was fabricated from cellulose pulp using in-house mechanical fibrillation equipment. Subsequently, freestanding MFC films were fabricated with in-house developed hot-plate drying technique. The MFC films were tested as substrate materials for printed electronics patterns. Conducting patterns were fabricated on the MFC films using screen printing and vacuum evaporation. Electrical conductivity of the fabricated patterns was measured using four-wire technique. It was shown that the MFC films are suitable substrate materials for printing of functional electronic ink patterns, and thermal annealing of the patterns.

AB - Microfibrillated cellulose (MFC) was fabricated from cellulose pulp using in-house mechanical fibrillation equipment. Subsequently, freestanding MFC films were fabricated with in-house developed hot-plate drying technique. The MFC films were tested as substrate materials for printed electronics patterns. Conducting patterns were fabricated on the MFC films using screen printing and vacuum evaporation. Electrical conductivity of the fabricated patterns was measured using four-wire technique. It was shown that the MFC films are suitable substrate materials for printing of functional electronic ink patterns, and thermal annealing of the patterns.

U2 - 10.1109/MARSS.2019.8860931

DO - 10.1109/MARSS.2019.8860931

M3 - Conference contribution

SN - 978-1-7281-0949-7

SP - 1

EP - 5

BT - Proceedings MARSS 2019- International Conference on Manipulation Automation and Robotics at Small Scales

A2 - Haliyo, Sinan

A2 - Sill, Albert

A2 - Zhou, Quan

A2 - Kallio, Pasi

A2 - Fatikow, Sergej

PB - IEEE

T2 - International Conference on Manipulation, Automation and Robotics at Small Scales

Y2 - 21 August 2019

ER -

Pammo A, Christophliemk H, Keskinen J , Björkqvist T, Siljander S, Mäntysalo M et al. Nanocellulose films as substrates for printed electronics. julkaisussa Haliyo S, Sill A, Zhou Q, Kallio P, Fatikow S, toimittajat, Proceedings MARSS 2019- International Conference on Manipulation Automation and Robotics at Small Scales: July 1-5, 2019 Helsinki. IEEE. 2019. s. 1-5 doi: 10.1109/MARSS.2019.8860931

Nanocellulose films as substrates for printed electronics

Abstrakti

Conference

Julkaisufoorumi-taso

Pääsy asiakirjaan

Sormenjälki

Laitteet

Laboratory for Future Electronics – LFE

Siteeraa tätä