Plant-wide interoperability and decoupled, data-driven process control with message bus communication

Petri Kannisto; David Hästbacka; Teresa Gutiérrez; Olli Suominen; Matti Vilkko; Peter Craamer

doi:10.1016/j.jii.2021.100253

Plant-wide interoperability and decoupled, data-driven process control with message bus communication

Petri Kannisto^*
, David Hästbacka
, Teresa Gutiérrez
, Olli Suominen
, Matti Vilkko
, Peter Craamer

^*Tämän työn vastaava kirjoittaja

Tutkimustuotos: Artikkeli › Tieteellinen › vertaisarvioitu

21 Sitaatiot (Scopus)

58 Lataukset (Pure)

Abstrakti

Conventional industrial communication systems suffer from rigidness, inflexibility and lack of scalability. The environment is heterogeneous as the systems exchange data with a variety communication protocols, some of which are proprietary. This makes it laborious and expensive to reconfigure or upgrade the systems. As the solution, this article proposes a message-bus-based communication architecture to enable information exchange between systems regardless of their geographical location and position within the functional hierarchy of the plant. The architecture not only enables communication to cross the conventional physical borders but also provides scalability to growing data volumes and network sizes. As proofs of concept, the article presents a prototype in three environments: a copper smelter, a steel plant and a distillation column. The results suggest that the message-bus-based approach has potential to renew industrial communications, a core part of the fourth industrial revolution.

Alkuperäiskieli	Englanti
Artikkeli	100253
Julkaisu	Journal of Industrial Information Integration
Vuosikerta	26
Varhainen verkossa julkaisun päivämäärä	8 elok. 2021
DOI - pysyväislinkit	https://doi.org/10.1016/j.jii.2021.100253
Tila	Julkaistu - 8 maalisk. 2022
OKM-julkaisutyyppi	A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Rahoitus

Additionally, this work was supported by the Academy of Finland (grant 310098 ). >[Formula presented], This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 723661. This study reflects only the authors? views, and the Commission is not responsible for any use that may be made of the information contained therein. The authors want to express their sincere gratitude to the funder and the project partners in COCOP project (Coordinating Optimisation of Complex Industrial Processes, https://www.cocop-spire.eu/). Additionally, this work was supported by the Academy of Finland (grant 310098). Finally, multiple persons participated in the development of the prototypes. The authors would like to mention especially the following: Mikko Korpi, Jussi Leinonen and Ari Kruskopf from Metso Outotec, Finland; Felix Bayon and Asier Arteaga from Sidenor Aceros Especiales S.L. Spain; Ville M?rsky from Tampere University; Kari Rainio, Matias Alarotu, Tiina Pajula and Jouni Savolainen from VTT Technical Research Centre of Finland. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 723661 . This study reflects only the authors’ views, and the Commission is not responsible for any use that may be made of the information contained therein. The authors want to express their sincere gratitude to the funder and the project partners in COCOP project (Coordinating Optimisation of Complex Industrial Processes, https://www.cocop-spire.eu/ ).

Julkaisufoorumi-taso

Jufo-taso 1

!!ASJC Scopus subject areas

Industrial and Manufacturing Engineering
Information Systems and Management

Pääsy asiakirjaan

10.1016/j.jii.2021.100253Lisenssi: CC BY

Plant-wide interoperabilityFinal published version, 1,58 MBLisenssi: CC BY

http://urn.fi/URN:NBN:fi:tuni-202110047387Lisenssi: CC BY

21 Viittaukset
5 Konferenssiartikkeli
2 Artikkeli

Interoperability of OPC UA PubSub with Existing Message Broker Integration Architectures
Hästbacka, D., Kannisto, P. & Kätkytniemi, A., 2022, IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society. IEEE, s. 1-6 6 Sivumäärä (Proceedings of the Annual Conference of the IEEE Industrial Electronics Society).
Tutkimustuotos: Konferenssiartikkeli › Tieteellinen › vertaisarvioitu

Open access
Tiedosto
4 Sitaatiot (Scopus)

67 Lataukset (Pure)
Software Toolkit for Development of Interoperable Communications in Data-driven Systems
Kannisto, P., Kätkytniemi, A., Vilkko, M. & Hästbacka, D., 2021, 17th IFAC Symposium on Information Control Problems in Manufacturing INCOM 2021. Monostori, L., Kádár, B. & Szaller, Á. (toim.). Elsevier, s. 845-850 6 Sivumäärä (IFAC-PapersOnLine; Vuosikerta 54, nro 1).
Tutkimustuotos: Konferenssiartikkeli › Tieteellinen › vertaisarvioitu

Open access
Tiedosto
3 Sitaatiot (Scopus)

218 Lataukset (Pure)
ICT-arkkitehtuuri suurten laitosten koordinoivaan optimointiin
Kannisto, P., Hästbacka, D., Rainio, K., Leinonen, J., Savolainen, J. & Vilkko, M., lokak. 2019, julkaisussa: Automaatioväylä. 35, 5, s. 18-20 3 Sivumäärä
Tutkimustuotos: Artikkeli › Ammatillinen

Open access

Siteeraa tätä

@article{6149b856d8a6425eadc14731e936405d,

title = "Plant-wide interoperability and decoupled, data-driven process control with message bus communication",

abstract = "Conventional industrial communication systems suffer from rigidness, inflexibility and lack of scalability. The environment is heterogeneous as the systems exchange data with a variety communication protocols, some of which are proprietary. This makes it laborious and expensive to reconfigure or upgrade the systems. As the solution, this article proposes a message-bus-based communication architecture to enable information exchange between systems regardless of their geographical location and position within the functional hierarchy of the plant. The architecture not only enables communication to cross the conventional physical borders but also provides scalability to growing data volumes and network sizes. As proofs of concept, the article presents a prototype in three environments: a copper smelter, a steel plant and a distillation column. The results suggest that the message-bus-based approach has potential to renew industrial communications, a core part of the fourth industrial revolution.",

keywords = "Industrial cyber{\textendash}physical systems, Industry 4.0, Publish{\textendash}subscribe communication pattern, Service-oriented architecture, Systems integration",

author = "Petri Kannisto and David H{\"a}stbacka and Teresa Guti{\'e}rrez and Olli Suominen and Matti Vilkko and Peter Craamer",

note = "Funding Information: Additionally, this work was supported by the Academy of Finland (grant 310098 ). Funding Information: >[Formula presented], This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 723661. This study reflects only the authors? views, and the Commission is not responsible for any use that may be made of the information contained therein. The authors want to express their sincere gratitude to the funder and the project partners in COCOP project (Coordinating Optimisation of Complex Industrial Processes, https://www.cocop-spire.eu/). Additionally, this work was supported by the Academy of Finland (grant 310098). Finally, multiple persons participated in the development of the prototypes. The authors would like to mention especially the following: Mikko Korpi, Jussi Leinonen and Ari Kruskopf from Metso Outotec, Finland; Felix Bayon and Asier Arteaga from Sidenor Aceros Especiales S.L. Spain; Ville M?rsky from Tampere University; Kari Rainio, Matias Alarotu, Tiina Pajula and Jouni Savolainen from VTT Technical Research Centre of Finland. Funding Information: This project has received funding from the European Union{\textquoteright}s Horizon 2020 research and innovation programme under grant agreement No 723661 . This study reflects only the authors{\textquoteright} views, and the Commission is not responsible for any use that may be made of the information contained therein. The authors want to express their sincere gratitude to the funder and the project partners in COCOP project (Coordinating Optimisation of Complex Industrial Processes, https://www.cocop-spire.eu/ ). Publisher Copyright: {\textcopyright} 2021 The Author(s)",

year = "2022",

month = mar,

day = "8",

doi = "10.1016/j.jii.2021.100253",

language = "English",

volume = "26",

journal = "Journal of Industrial Information Integration",

issn = "2467-964X",

publisher = "Elsevier",

}

TY - JOUR

T1 - Plant-wide interoperability and decoupled, data-driven process control with message bus communication

AU - Kannisto, Petri

AU - Hästbacka, David

AU - Gutiérrez, Teresa

AU - Suominen, Olli

AU - Vilkko, Matti

AU - Craamer, Peter

N1 - Funding Information: Additionally, this work was supported by the Academy of Finland (grant 310098 ). Funding Information: >[Formula presented], This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 723661. This study reflects only the authors? views, and the Commission is not responsible for any use that may be made of the information contained therein. The authors want to express their sincere gratitude to the funder and the project partners in COCOP project (Coordinating Optimisation of Complex Industrial Processes, https://www.cocop-spire.eu/). Additionally, this work was supported by the Academy of Finland (grant 310098). Finally, multiple persons participated in the development of the prototypes. The authors would like to mention especially the following: Mikko Korpi, Jussi Leinonen and Ari Kruskopf from Metso Outotec, Finland; Felix Bayon and Asier Arteaga from Sidenor Aceros Especiales S.L. Spain; Ville M?rsky from Tampere University; Kari Rainio, Matias Alarotu, Tiina Pajula and Jouni Savolainen from VTT Technical Research Centre of Finland. Funding Information: This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 723661 . This study reflects only the authors’ views, and the Commission is not responsible for any use that may be made of the information contained therein. The authors want to express their sincere gratitude to the funder and the project partners in COCOP project (Coordinating Optimisation of Complex Industrial Processes, https://www.cocop-spire.eu/ ). Publisher Copyright: © 2021 The Author(s)

PY - 2022/3/8

Y1 - 2022/3/8

N2 - Conventional industrial communication systems suffer from rigidness, inflexibility and lack of scalability. The environment is heterogeneous as the systems exchange data with a variety communication protocols, some of which are proprietary. This makes it laborious and expensive to reconfigure or upgrade the systems. As the solution, this article proposes a message-bus-based communication architecture to enable information exchange between systems regardless of their geographical location and position within the functional hierarchy of the plant. The architecture not only enables communication to cross the conventional physical borders but also provides scalability to growing data volumes and network sizes. As proofs of concept, the article presents a prototype in three environments: a copper smelter, a steel plant and a distillation column. The results suggest that the message-bus-based approach has potential to renew industrial communications, a core part of the fourth industrial revolution.

AB - Conventional industrial communication systems suffer from rigidness, inflexibility and lack of scalability. The environment is heterogeneous as the systems exchange data with a variety communication protocols, some of which are proprietary. This makes it laborious and expensive to reconfigure or upgrade the systems. As the solution, this article proposes a message-bus-based communication architecture to enable information exchange between systems regardless of their geographical location and position within the functional hierarchy of the plant. The architecture not only enables communication to cross the conventional physical borders but also provides scalability to growing data volumes and network sizes. As proofs of concept, the article presents a prototype in three environments: a copper smelter, a steel plant and a distillation column. The results suggest that the message-bus-based approach has potential to renew industrial communications, a core part of the fourth industrial revolution.

KW - Industrial cyber–physical systems

KW - Industry 4.0

KW - Publish–subscribe communication pattern

KW - Service-oriented architecture

KW - Systems integration

U2 - 10.1016/j.jii.2021.100253

DO - 10.1016/j.jii.2021.100253

M3 - Article

AN - SCOPUS:85112709176

SN - 2467-964X

VL - 26

JO - Journal of Industrial Information Integration

JF - Journal of Industrial Information Integration

M1 - 100253

ER -

Plant-wide interoperability and decoupled, data-driven process control with message bus communication

Abstrakti

Rahoitus

Julkaisufoorumi-taso

!!ASJC Scopus subject areas

Pääsy asiakirjaan

Sormenjälki

Tutkimustuotos

Interoperability of OPC UA PubSub with Existing Message Broker Integration Architectures

Software Toolkit for Development of Interoperable Communications in Data-driven Systems

ICT-arkkitehtuuri suurten laitosten koordinoivaan optimointiin

Siteeraa tätä