Plate Bending Models for Paper Manufacturing Processes and Comparisons to Simulations with Finite Element Methods

Mikko Salo; Jarno Jokinen; Matti Vilkko; Mikko Kanerva

doi:10.1016/j.ifacol.2023.10.821

Plate Bending Models for Paper Manufacturing Processes and Comparisons to Simulations with Finite Element Methods

Mikko Salo, Jarno Jokinen, Matti Vilkko, Mikko Kanerva

Tutkimustuotos: Konferenssiartikkeli › Tieteellinen › vertaisarvioitu

1 Sitaatiot (Scopus)

24 Lataukset (Pure)

Abstrakti

An analytical plate bending model is used in a novel measurement method that is being developed for feedback control of material properties in paper manufacturing. The model involves an efficient material model for paper yet allowing a selected level of material complexity. In this study, the effects of the simplifications are studied by comparing the results with a discretized model applied in finite element methods. The boundary conditions required for specifying the censoring location in the real system proves to be challenging and a specific combined load distribution might be necessary to apply the developed model.

Alkuperäiskieli	Englanti
Otsikko	International Federation of Automatic Control: 22nd IFAC World Congress: Yokohama, Japan, July 9-14, 2023: Proceedings
Toimittajat	Hideaki Ishii, Yoshio Ebihara, Jun-ichi Imura, Masaki Yamakita
Kustantaja	Elsevier
Sivut	11106-11110
Sivumäärä	5
Vuosikerta	56
DOI - pysyväislinkit	https://doi.org/10.1016/j.ifacol.2023.10.821
Tila	Julkaistu - 2023
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisussa
Tapahtuma	IFAC World Congress - Yokohama, Japani Kesto: 9 heinäk. 2023 → 14 heinäk. 2023

Julkaisusarja

Nimi	IFAC-PapersOnLine
Kustantaja	Elsevier
Numero	2
Vuosikerta	56
ISSN (painettu)	2405-8971
ISSN (elektroninen)	2405-8963

Conference

Conference	IFAC World Congress
Maa/Alue	Japani
Kaupunki	Yokohama
Ajanjakso	9/07/23 → 14/07/23

Julkaisufoorumi-taso

Jufo-taso 1

Pääsy asiakirjaan

10.1016/j.ifacol.2023.10.821Lisenssi: CC BY-NC-ND

1-s2.0-S2405896323011989-mainFinal published version, 931 KBLisenssi: CC BY-NC-ND

https://urn.fi/URN:NBN:fi:tuni-2023112710243Lisenssi: CC BY-NC-ND

Siteeraa tätä

Salo, M., Jokinen, J., Vilkko, M., & Kanerva, M. (2023). Plate Bending Models for Paper Manufacturing Processes and Comparisons to Simulations with Finite Element Methods. teoksessa H. Ishii, Y. Ebihara, J. Imura, & M. Yamakita (Toimittajat), International Federation of Automatic Control: 22nd IFAC World Congress: Yokohama, Japan, July 9-14, 2023: Proceedings (Vuosikerta 56, Sivut 11106-11110). (IFAC-PapersOnLine; Vuosikerta 56, Nro 2). Elsevier. https://doi.org/10.1016/j.ifacol.2023.10.821

Salo, Mikko ; Jokinen, Jarno ; Vilkko, Matti et al. / Plate Bending Models for Paper Manufacturing Processes and Comparisons to Simulations with Finite Element Methods. International Federation of Automatic Control: 22nd IFAC World Congress: Yokohama, Japan, July 9-14, 2023: Proceedings. Toimittaja / Hideaki Ishii ; Yoshio Ebihara ; Jun-ichi Imura ; Masaki Yamakita. Vuosikerta 56 Elsevier, 2023. Sivut 11106-11110 (IFAC-PapersOnLine; 2).

@inproceedings{147ab791c9bb48f5812b4ee6f037c1fd,

title = "Plate Bending Models for Paper Manufacturing Processes and Comparisons to Simulations with Finite Element Methods",

abstract = "An analytical plate bending model is used in a novel measurement method that is being developed for feedback control of material properties in paper manufacturing. The model involves an efficient material model for paper yet allowing a selected level of material complexity. In this study, the effects of the simplifications are studied by comparing the results with a discretized model applied in finite element methods. The boundary conditions required for specifying the censoring location in the real system proves to be challenging and a specific combined load distribution might be necessary to apply the developed model.",

author = "Mikko Salo and Jarno Jokinen and Matti Vilkko and Mikko Kanerva",

year = "2023",

doi = "10.1016/j.ifacol.2023.10.821",

language = "English",

volume = "56",

series = "IFAC-PapersOnLine",

publisher = "Elsevier",

number = "2",

pages = "11106--11110",

editor = "Hideaki Ishii and Yoshio Ebihara and Jun-ichi Imura and Masaki Yamakita",

booktitle = "International Federation of Automatic Control: 22nd IFAC World Congress: Yokohama, Japan, July 9-14, 2023: Proceedings",

address = "Netherlands",

note = "IFAC World Congress ; Conference date: 09-07-2023 Through 14-07-2023",

}

Salo, M , Jokinen, J , Vilkko, M & Kanerva, M 2023, Plate Bending Models for Paper Manufacturing Processes and Comparisons to Simulations with Finite Element Methods. julkaisussa H Ishii, Y Ebihara, J Imura & M Yamakita (toim), International Federation of Automatic Control: 22nd IFAC World Congress: Yokohama, Japan, July 9-14, 2023: Proceedings. Vuosikerta 56, IFAC-PapersOnLine, Nro 2, Vuosikerta 56, Elsevier, Sivut 11106-11110, IFAC World Congress, Yokohama, Japani, 9/07/23. https://doi.org/10.1016/j.ifacol.2023.10.821

Plate Bending Models for Paper Manufacturing Processes and Comparisons to Simulations with Finite Element Methods. / Salo, Mikko ; Jokinen, Jarno ; Vilkko, Matti et al.
International Federation of Automatic Control: 22nd IFAC World Congress: Yokohama, Japan, July 9-14, 2023: Proceedings. toim. / Hideaki Ishii; Yoshio Ebihara; Jun-ichi Imura; Masaki Yamakita. Vuosikerta 56 Elsevier, 2023. s. 11106-11110 (IFAC-PapersOnLine; Vuosikerta 56, Nro 2).

Tutkimustuotos: Konferenssiartikkeli › Tieteellinen › vertaisarvioitu

TY - GEN

T1 - Plate Bending Models for Paper Manufacturing Processes and Comparisons to Simulations with Finite Element Methods

AU - Salo, Mikko

AU - Jokinen, Jarno

AU - Vilkko, Matti

AU - Kanerva, Mikko

PY - 2023

Y1 - 2023

N2 - An analytical plate bending model is used in a novel measurement method that is being developed for feedback control of material properties in paper manufacturing. The model involves an efficient material model for paper yet allowing a selected level of material complexity. In this study, the effects of the simplifications are studied by comparing the results with a discretized model applied in finite element methods. The boundary conditions required for specifying the censoring location in the real system proves to be challenging and a specific combined load distribution might be necessary to apply the developed model.

AB - An analytical plate bending model is used in a novel measurement method that is being developed for feedback control of material properties in paper manufacturing. The model involves an efficient material model for paper yet allowing a selected level of material complexity. In this study, the effects of the simplifications are studied by comparing the results with a discretized model applied in finite element methods. The boundary conditions required for specifying the censoring location in the real system proves to be challenging and a specific combined load distribution might be necessary to apply the developed model.

U2 - 10.1016/j.ifacol.2023.10.821

DO - 10.1016/j.ifacol.2023.10.821

M3 - Conference contribution

VL - 56

T3 - IFAC-PapersOnLine

SP - 11106

EP - 11110

BT - International Federation of Automatic Control: 22nd IFAC World Congress: Yokohama, Japan, July 9-14, 2023: Proceedings

A2 - Ishii, Hideaki

A2 - Ebihara, Yoshio

A2 - Imura, Jun-ichi

A2 - Yamakita, Masaki

PB - Elsevier

T2 - IFAC World Congress

Y2 - 9 July 2023 through 14 July 2023

ER -

Salo M , Jokinen J , Vilkko M , Kanerva M. Plate Bending Models for Paper Manufacturing Processes and Comparisons to Simulations with Finite Element Methods. julkaisussa Ishii H, Ebihara Y, Imura J, Yamakita M, toimittajat, International Federation of Automatic Control: 22nd IFAC World Congress: Yokohama, Japan, July 9-14, 2023: Proceedings. Vuosikerta 56. Elsevier. 2023. s. 11106-11110. (IFAC-PapersOnLine; 2). doi: 10.1016/j.ifacol.2023.10.821

Plate Bending Models for Paper Manufacturing Processes and Comparisons to Simulations with Finite Element Methods

Abstrakti

Julkaisusarja

Conference

Julkaisufoorumi-taso

Pääsy asiakirjaan

Sormenjälki

Siteeraa tätä