The effect of test parameters on large particle slurryerosion testing

Niko Ojala, Kati Valtonen, Pekka Siitonen, Veli-Tapani Kuokkala

    Tutkimustuotos: KonferenssiartikkeliScientificvertaisarvioitu

    23 Lataukset (Pure)

    Abstrakti

    Understanding the effect of testing parameters is important for getting the test environment as close as possible to real applications and for understanding the processes that are involved in the testing itself. A pin mill type slurry-pot wear tester was developed for heavy-duty testing with high speed and large abrasive size [1]. This study focuses on the effect of different testing parameters on large particle slurry testing. Parameters such as rotation speed of the samples, particle size and slurry concentration were varied.
    Round steel samples and slurry with water and granite gravel were used for testing. The test parameter variations were 4 to 10 mm for granite particle size, up to 23 wt% for slurry concentration and up to 20 m/s for sample tip speed. The relationship between the particle size, slurry concentration, and the amount of particles are discussed. Also the role of the kinetic energy of the abrasive particles is considered for large particle sizes.
    AlkuperäiskieliEnglanti
    Otsikko3rd International Tribology Symposium of IFToMM
    JulkaisupaikkaLuleå, Sweden
    Sivumäärä8
    TilaJulkaistu - 19 maalisk. 2013
    OKM-julkaisutyyppiA4 Artikkeli konferenssijulkaisussa

    Julkaisusarja

    NimiTribology - Materials, Surfaces & Interfaces
    Numero2
    Vuosikerta8
    ISSN (painettu)1751-5831

    !!ASJC Scopus subject areas

    • Metals and Alloys
    • Polymers and Plastics

    Sormenjälki

    Sukella tutkimusaiheisiin 'The effect of test parameters on large particle slurryerosion testing'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

    Siteeraa tätä