Tribological Assessment of Cold Sprayed Aluminum-Quasicrystal Composite Coatings

Reza Jafari; Minnamari Vippola; Heli Koivuluoto; Jan Cizek; Frantisek Lukac; Ladislav  Cvrcek; Matej  Buril; Jan  Walter; Jarkko Kiilakoski; Mari Honkanen

doi:10.31399/asm.cp.itsc2023p0200

Tribological Assessment of Cold Sprayed Aluminum-Quasicrystal Composite Coatings

Reza Jafari, Minnamari Vippola, Heli Koivuluoto, Jan Cizek, Frantisek Lukac, Ladislav Cvrcek, Matej Buril, Jan Walter, Jarkko Kiilakoski, Mari Honkanen

Materiaalitiede ja ympäristötekniikka

Tutkimustuotos: Konferenssiartikkeli › Scientific › vertaisarvioitu

5 Lataukset (Pure)

Abstrakti

Cold spray (CS) technology has proven an enormous potential in the production of composite coatings, enabling a production of materials with superior qualities such as enhanced tribological behavior. This study aims to investigate the tribological properties of CS Al-based composite coatings reinforced by quasicrystalline (QC) particles. Two different Al alloys were used as the matrix, AA 6061 and AA 2024, and mixed with Al-based QC particles (Al-Cr-Fe-Cu) at different Al/QC ratios. A room-temperature ball-on-disc test was then used to evaluate the wear resistance of the CS composite coatings in air and compared to those of the CS non-reinforced Al alloy coatings as well as cast counterparts (AA 6061-T6). We have demonstrated that CS could be employed to produce dense and thick Al-QC composites. Further, the addition of the QC particles into the structure increased the wear resistance of the matrix resistance up to 8 times.

Alkuperäiskieli	Englanti
Otsikko	Thermal Spray 2023: Proceedings from the International Thermal Spray Conference
Kustantaja	ASM International
Sivut	200-207
Sivumäärä	8
DOI - pysyväislinkit	https://doi.org/10.31399/asm.cp.itsc2023p0200
Tila	Julkaistu - 22 toukok. 2023
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisussa
Tapahtuma	International Thermal Spray Conference - Quebec, Kanada Kesto: 22 toukok. 2023 → 25 toukok. 2023 https://www.asminternational.org/itsc-2023/

Julkaisusarja

Nimi	Proceedings of the International Thermal Spray Conference
ISSN (painettu)	1341-3074

Conference

Conference	International Thermal Spray Conference
Lyhennettä	ITSC
Maa/Alue	Kanada
Kaupunki	Quebec
Ajanjakso	22/05/23 → 25/05/23
www-osoite	https://www.asminternational.org/itsc-2023/

Julkaisufoorumi-taso

Jufo-taso 1

Pääsy asiakirjaan

10.31399/asm.cp.itsc2023p0200Lisenssi: Unspecified

ITSC2023 Paper_58012_manuscript
This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited
Accepted author manuscript, 21,5 MB

https://urn.fi/URN:NBN:fi:tuni-202309057976Lisenssi: Unspecified

Siteeraa tätä

Jafari, R., Vippola, M., Koivuluoto, H., Cizek, J., Lukac, F., Cvrcek, L., Buril, M., Walter, J., Kiilakoski, J., & Honkanen, M. (2023). Tribological Assessment of Cold Sprayed Aluminum-Quasicrystal Composite Coatings. teoksessa Thermal Spray 2023: Proceedings from the International Thermal Spray Conference (Sivut 200-207). (Proceedings of the International Thermal Spray Conference). ASM International. https://doi.org/10.31399/asm.cp.itsc2023p0200

@inproceedings{d5502a5c6f294bcea7e215366c17a7b8,

title = "Tribological Assessment of Cold Sprayed Aluminum-Quasicrystal Composite Coatings",

abstract = "Cold spray (CS) technology has proven an enormous potential in the production of composite coatings, enabling a production of materials with superior qualities such as enhanced tribological behavior. This study aims to investigate the tribological properties of CS Al-based composite coatings reinforced by quasicrystalline (QC) particles. Two different Al alloys were used as the matrix, AA 6061 and AA 2024, and mixed with Al-based QC particles (Al-Cr-Fe-Cu) at different Al/QC ratios. A room-temperature ball-on-disc test was then used to evaluate the wear resistance of the CS composite coatings in air and compared to those of the CS non-reinforced Al alloy coatings as well as cast counterparts (AA 6061-T6). We have demonstrated that CS could be employed to produce dense and thick Al-QC composites. Further, the addition of the QC particles into the structure increased the wear resistance of the matrix resistance up to 8 times.",

keywords = "Aluminum-matrix composites, aluminum alloy, Cold spray, Wear resistance, quasicrystal, Ball-on-disc",

author = "Reza Jafari and Minnamari Vippola and Heli Koivuluoto and Jan Cizek and Frantisek Lukac and Ladislav Cvrcek and Matej Buril and Jan Walter and Jarkko Kiilakoski and Mari Honkanen",

year = "2023",

month = may,

day = "22",

doi = "10.31399/asm.cp.itsc2023p0200",

language = "English",

series = "Proceedings of the International Thermal Spray Conference",

publisher = "ASM International",

pages = "200--207",

booktitle = "Thermal Spray 2023: Proceedings from the International Thermal Spray Conference",

address = "United States",

note = "International Thermal Spray Conference, ITSC ; Conference date: 22-05-2023 Through 25-05-2023",

url = "https://www.asminternational.org/itsc-2023/",

}

Jafari, R , Vippola, M , Koivuluoto, H, Cizek, J, Lukac, F, Cvrcek, L, Buril, M, Walter, J, Kiilakoski, J & Honkanen, M 2023, Tribological Assessment of Cold Sprayed Aluminum-Quasicrystal Composite Coatings. julkaisussa Thermal Spray 2023: Proceedings from the International Thermal Spray Conference. Proceedings of the International Thermal Spray Conference, ASM International, Sivut 200-207, International Thermal Spray Conference, Quebec, Kanada, 22/05/23. https://doi.org/10.31399/asm.cp.itsc2023p0200

Tribological Assessment of Cold Sprayed Aluminum-Quasicrystal Composite Coatings. / Jafari, Reza ; Vippola, Minnamari ; Koivuluoto, Heli et al.
Thermal Spray 2023: Proceedings from the International Thermal Spray Conference. ASM International, 2023. s. 200-207 (Proceedings of the International Thermal Spray Conference).

Tutkimustuotos: Konferenssiartikkeli › Scientific › vertaisarvioitu

TY - GEN

T1 - Tribological Assessment of Cold Sprayed Aluminum-Quasicrystal Composite Coatings

AU - Jafari, Reza

AU - Vippola, Minnamari

AU - Koivuluoto, Heli

AU - Cizek, Jan

AU - Lukac, Frantisek

AU - Cvrcek, Ladislav

AU - Buril, Matej

AU - Walter, Jan

AU - Kiilakoski, Jarkko

AU - Honkanen, Mari

PY - 2023/5/22

Y1 - 2023/5/22

N2 - Cold spray (CS) technology has proven an enormous potential in the production of composite coatings, enabling a production of materials with superior qualities such as enhanced tribological behavior. This study aims to investigate the tribological properties of CS Al-based composite coatings reinforced by quasicrystalline (QC) particles. Two different Al alloys were used as the matrix, AA 6061 and AA 2024, and mixed with Al-based QC particles (Al-Cr-Fe-Cu) at different Al/QC ratios. A room-temperature ball-on-disc test was then used to evaluate the wear resistance of the CS composite coatings in air and compared to those of the CS non-reinforced Al alloy coatings as well as cast counterparts (AA 6061-T6). We have demonstrated that CS could be employed to produce dense and thick Al-QC composites. Further, the addition of the QC particles into the structure increased the wear resistance of the matrix resistance up to 8 times.

AB - Cold spray (CS) technology has proven an enormous potential in the production of composite coatings, enabling a production of materials with superior qualities such as enhanced tribological behavior. This study aims to investigate the tribological properties of CS Al-based composite coatings reinforced by quasicrystalline (QC) particles. Two different Al alloys were used as the matrix, AA 6061 and AA 2024, and mixed with Al-based QC particles (Al-Cr-Fe-Cu) at different Al/QC ratios. A room-temperature ball-on-disc test was then used to evaluate the wear resistance of the CS composite coatings in air and compared to those of the CS non-reinforced Al alloy coatings as well as cast counterparts (AA 6061-T6). We have demonstrated that CS could be employed to produce dense and thick Al-QC composites. Further, the addition of the QC particles into the structure increased the wear resistance of the matrix resistance up to 8 times.

KW - Aluminum-matrix composites

KW - aluminum alloy

KW - Cold spray

KW - Wear resistance

KW - quasicrystal

KW - Ball-on-disc

U2 - 10.31399/asm.cp.itsc2023p0200

DO - 10.31399/asm.cp.itsc2023p0200

M3 - Conference contribution

T3 - Proceedings of the International Thermal Spray Conference

SP - 200

EP - 207

BT - Thermal Spray 2023: Proceedings from the International Thermal Spray Conference

PB - ASM International

T2 - International Thermal Spray Conference

Y2 - 22 May 2023 through 25 May 2023

ER -

Jafari R , Vippola M , Koivuluoto H, Cizek J, Lukac F, Cvrcek L et al. Tribological Assessment of Cold Sprayed Aluminum-Quasicrystal Composite Coatings. julkaisussa Thermal Spray 2023: Proceedings from the International Thermal Spray Conference. ASM International. 2023. s. 200-207. (Proceedings of the International Thermal Spray Conference). doi: 10.31399/asm.cp.itsc2023p0200

Tribological Assessment of Cold Sprayed Aluminum-Quasicrystal Composite Coatings

Abstrakti

Julkaisusarja

Conference

Julkaisufoorumi-taso

Pääsy asiakirjaan

Sormenjälki

Siteeraa tätä