UV-Assisted 3D Printing of Polymer Composites from Thermally and Mechanically Recycled Carbon Fibers

Andrea Mantelli, Alessia Romani, Raffaella Suriano, Marco Diani, Marcello Colledani, Essi Sarlin, Stefano Turri, Marinella Levi

Tutkimustuotos: ArtikkeliScientificvertaisarvioitu

23 Sitaatiot (Scopus)
3 Lataukset (Pure)

Abstrakti

Despite the growing global interest in 3D printed carbon fiber reinforced polymers, most of the applications are still limited to high-performance sectors due to the low effectiveness–cost ratio of virgin carbon fibers. However, the use of recycled carbon fibers in 3D printing is almost unexplored, especially for thermoset-based composites. This paper aims to demonstrate the feasibility of recycled carbon fibers 3D printing via UV-assisted direct ink writing. Pyrolyzed recycled carbon fibers with a sizing treatment were firstly shredded to be used as a reinforcement of a thermally and photo-curable acrylic resin. UV-differential scanning calorimetry analyses were then performed to define the material crosslinking of the 3D printable ink. Because of the poor UV reactivity of the resin loaded with carbon fibers, a rheology modifier was added to guarantee shape retention after 3D printing. Thanks to a customized 3D printer based on a commercial apparatus, a batch of specimens was successfully 3D printed. According to the tensile tests and Scanning Electron Microscopy analysis, the material shows good mechanical properties and the absence of layer marks related to the 3D printing. These results will, therefore, pave the way for the use of 3D printed recycled carbon fiber reinforced polymers in new fields of application.

AlkuperäiskieliEnglanti
Artikkeli726
Sivumäärä15
JulkaisuPolymers
Vuosikerta13
Numero5
DOI - pysyväislinkit
TilaJulkaistu - 2021
OKM-julkaisutyyppiA1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä

Julkaisufoorumi-taso

  • Jufo-taso 1

!!ASJC Scopus subject areas

  • Yleinen kemia
  • Polymers and Plastics

Sormenjälki

Sukella tutkimusaiheisiin 'UV-Assisted 3D Printing of Polymer Composites from Thermally and Mechanically Recycled Carbon Fibers'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

Siteeraa tätä